PiStorm Chat

[mrbombermillzy]

I wonder if to post my progress here or would people prefer I not hijack this thread and start my own blog on it all?

1. It is indeed 'PiStorm Chat' and...
2. Its your forum.

I'd say go for it.

[Darklord]

Ditto. The PiSTorm project really needs experienced people helping with it.

[exxos]

So is there any difference for using PI3/4/5 ? I guess just go with the 5 as it may be faster I guess

[Steve]

So is there any difference for using PI3/4/5 ? I guess just go with the 5 as it may be faster I guess

5 isn't compatible, it has slower GPIO. 4 is the best you can get. Don't get a 3 for the H5, get a 4 like me (to avoid any complications!)

[exxos]

5 isn't compatible, it has slower GPIO.

ah ok

4 is the best you can get. Don't get a 3 for the H5, get a 4 like me

4 it is then

I take it I don't need a external PSU ?

[Steve]

@exxos No you're fine, it'll get power from the 68k bus. The H5 is strong enough for this, especially with your super-quality PSU.

[exxos]

@exxos No you're fine, it'll get power from the 68k bus. The H5 is strong enough for this, especially with your super-quality PSU.

So will get this first up then https://www.rapidonline.com/raspberry-p ... gb-75-1007

[Steve]

@exxos Yeah that'd be great Remember to get that GPIO riser package I mentioned in PM too.

[exxos]

@exxos Yeah that'd be great Remember to get that GPIO riser package I mentioned in PM too.

Was just looking at that, looks like the connectors I use on my Falcon RAM boards, no idea if the pitch is the same though, think the falcon was 2mm pitch..

[exxos]

Kinda stupid really, tells you everything other than the pin pitch. I would have thought that be a important thing to know

Capture.PNG (103.26 KiB) Viewed 3193 times