Have you left it on RAM test for a hour ? If things are progressively getting worse the longer its powered up, it normally means the RAM isn't being refreshed.
Edit: or the CPU is overheating , but would assume it would crash if that was the case.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Starting to build my TF536
Moderators: terriblefire, Terriblefire Moderator
-
Avinitlarge
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
I’ll try it now
-
Avinitlarge
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
Finally something popped up, slow ram.
- 1608C158-8A40-4258-8119-A2C869D03981.jpeg (650 KiB) Viewed 4533 times
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Starting to build my TF536
That looks like kickstart 1.3?Avinitlarge wrote: Sat Apr 17, 2021 2:07 pm Does this in one of my others
CF114723-22A1-4182-B134-5C4BD751F46E.jpeg
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Avinitlarge
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
It’s a 500+ 2.04 Romterriblefire wrote: Sat Apr 17, 2021 7:30 pmThat looks like kickstart 1.3?Avinitlarge wrote: Sat Apr 17, 2021 2:07 pm Does this in one of my others
CF114723-22A1-4182-B134-5C4BD751F46E.jpeg
-
Maximilian
- Posts: 407
- Joined: Thu Feb 28, 2019 5:02 pm
Re: Starting to build my TF536
Where did you get the CPLD from?
-
Avinitlarge
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
All the parts apart from the cpu and socket were bought from RS
-
Avinitlarge
- Posts: 51
- Joined: Fri Apr 09, 2021 11:15 pm
- Location: Rotherham
- Contact:
Re: Starting to build my TF536
Just come across another issue I think. I’ve added a 120gb hard drive but it is showing up a lot less. I know 120 is over kill but it’s all I have at the moment.
- 5D4F832C-0E1C-4BAB-ADB0-B0EC7422147C.jpeg (776.48 KiB) Viewed 4383 times
Re: Starting to build my TF536
Don't use HDInsttools. It is horribly buggy and it will kill anything you try to partition with it. Use HDToolBox from 3.1.4 or 3.9. The best thing is to partition it with WinUAE first.