Stumbled on Spidi's CDTV card:
http://eab.abime.net/showthread.php?t=95073
Seems he was able to solve DMAC problem, both, ide and CDROM are working! Awesome news, that gives me hope to see TF534 tunning on CDTV one day...
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
My CDTV Nightmare
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: My CDTV Nightmare
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: My CDTV Nightmare
Its more likely to be a 536.. The 534 is not getting touched again.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
dalek
- Posts: 232
- Joined: 08 Nov 2018 11:03
- Location: NSW Australia
Re: My CDTV Nightmare
Shame his stuff is closed source and you can't build one yourself, and that he doesn't share any info back to the community :(
That board also doesn't have a CPU and is CDTV specific, so there could be some cheats involved that a more general accelerator (proper) couldn't get away with.
I'll see if I can do some testing on the weekend with my TF534+A570 - I think the answer is close!
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: My CDTV Nightmare
The DMAC stuff will all be bus grant related. Similar to the Atari ST
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: ClaudeBot, Google [Bot] and 1 guest