Robson's H5 x 2

[Robson]

It's jumpered to 1Mb at the moment. (I'm 1 jumper short but memory size doesn't make any difference)

[Robson]

Nothing should be accessing it, so have you done verify ROM ? Looks like you have PP's modified TOS104 so you really need to try a generic 104 so the diag cart can do a proper checksum on it.

It's the same TOS I use with H4 build. There were no issues with it.

[exxos]

Nothing should be accessing it, so have you done verify ROM ? Looks like you have PP's modified TOS104 so you really need to try a generic 104 so the diag cart can do a proper checksum on it.

It's the same TOS I use with H4 build. There were no issues with it.

Its not what I mean, I mean checksum will verify all the ROM address / data lines are connected correctly etc..

[Robson]

A10 and A13 shorted together. These are the 2 measuring lower, 2.4k (common imp) to gnd as well.
I'm hoping if that's fixed it will be back.

[Robson]

@exxos Can you help me with these 2 lines (A10, A13). When is it when they're running close together? To MMU?
thanks

[exxos]

@exxos Can you help me with these 2 lines (A10, A13). When is it when they're running close together? To MMU?
thanks

They run all over the place, it could be anywhere...

1.PNG (764.94 KiB) Viewed 6585 times

2.PNG (119.17 KiB) Viewed 6584 times

3.PNG (165.71 KiB) Viewed 6584 times

4.PNG (274.53 KiB) Viewed 6582 times

[Robson]

Thanks...I thought this will be the case.