TF 534 Status Update

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

Post Reply
User avatar
PhilC
Moderator
Moderator
Posts: 7502
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF 534 Status Update

Post by PhilC »

Sounds good to me, sign me up already :D
If it ain't broke, test it to Destruction.
Top
User avatar
Cyprian
Posts: 547
Joined: Fri Dec 22, 2017 9:16 am
Location: Warszawa, Poland
Contact:
Contact Cyprian

Re: TF 534 Status Update

Post by Cyprian »

terriblefire wrote: Sat Jan 05, 2019 1:49 am OK update.

I have fixed the Atari ST bus grant issue (i think).
great,
do you have possibility check whether the BLiTTER works also ok?
ATW800/2 / V4sa / Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF 534 Status Update

Post by terriblefire »

Its not something I can test right now unfortunately.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF 534 Status Update

Post by terriblefire »

The Tf534 rev 2C has shipped. I suppose it’s really the rev 3.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7502
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF 534 Status Update

Post by PhilC »

Hi TF,

Will try flashing my two 534s tomorrow and then burning some emutos and diagrom eprom.

Do you have a suggested firmware version for use with the ST, or should I just flash it with the latest version?
If it ain't broke, test it to Destruction.
Top
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF 534 Status Update

Post by terriblefire »

PhilC wrote: Fri Mar 29, 2019 8:48 pm Hi TF,

Will try flashing my two 534s tomorrow and then burning some emutos and diagrom eprom.

Do you have a suggested firmware version for use with the ST, or should I just flash it with the latest version?
I have an ST specific one somewhere.. I'll see if i can find it.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Top
Post Reply

Return to “TF534 (OBSOLETE)”