Bold question: would a drop of hot glue do the trick?tzok wrote: 12 Feb 2023 11:00 Also, you should protect the cleaned area of the PCB from absorbing the moisture from the air by soaking it with an electro-insulating varnish or a cyanoacrylate glue.
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Bulk capacitor burning in
-
satjanand
- Posts: 36
- Joined: 04 Nov 2021 18:11
Re: Bulk capacitor burning in
-
rubber_jonnie
- Site Admin
- Posts: 15022
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Bulk capacitor burning in
I would say no, you're looking for something that will soak into the PCB, not sit on top of it.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Who is online
Users browsing this forum: ClaudeBot and 14 guests