Stuff and Things.

Blogs & guides and tales of woo by forum members.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7376
Joined: 13 Nov 2017 19:19
Location: Oxford, UK.

Re: Stuff and Things.

Post by stephen_usher »

From the level for scorching I would very much suspect that the fibreglass substrate is now carbonised and conductive.

As for low light levels in your fibre... it's Winter, not much light at this time of year. It'll be fine in the Summer. ;-)
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

stephen_usher wrote: 04 Jan 2023 11:50 From the level for scorching I would very much suspect that the fibreglass substrate is now carbonised and conductive.

As for low light levels in your fibre... it's Winter, not much light at this time of year. It'll be fine in the Summer. ;-)
Like Han Solo, it's encased in carbonite, and I have to agree with you. It can be replaced with an ATX PSU, there is an article on 68KMLA. I have a PicoPSU that should be more than adequate, so I should be able to use that to replace the old scorched heap of junk :)

As for low light levels...
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Tomswork
Posts: 776
Joined: 22 Nov 2019 22:05

Re: Stuff and Things.

Post by Tomswork »

Ouch carbon master it looks like my toast yes that has some carbon tracking

Tom
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

Tomswork wrote: 04 Jan 2023 16:40 Ouch carbon master it looks like my toast yes that has some carbon tracking

Tom
Yeah, it's pretty carbony for sure.

At least my fibre is fixed, they found a faulty splice that was letting out light. All fixed and the signal up 8db and in normal range again.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

Something different today, a Sega Saturn 3d controller (Not really 3d, just analog/digital switchable) and a PCB holder:

PXL_20230203_100349700.jpg

The controller works really nicely with Knights into Dreams, it's much easier to play than the joypad.
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Icky
Site Admin
Site Admin
Posts: 4375
Joined: 03 Sep 2017 10:57
Location: UK

Re: Stuff and Things.

Post by Icky »

SNAP, if you can spot it in this mess on my workbench.

IMG_2140.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

Icky wrote: 03 Feb 2023 12:25 SNAP, if you can spot it in this mess on my workbench.


IMG_2140.jpeg
Yeah, I see it :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

Had a bit of a shopping spree for some bits and bobs, got a slightly better UV curing light for the workbench and some more heat shrink tubing:

PXL_20230209_092158192.jpg

Some more odds and sods on the way to restock, such as flux, and some small tools I've been meaning to pick up for a while now.
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14893
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Stuff and Things.

Post by rubber_jonnie »

Another smol item arrived today:

PXL_20230213_130100318.jpg

A little inline USB power meter, seen here reporting how much power my UV lamp from the previous post draws when it's on :)
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7376
Joined: 13 Nov 2017 19:19
Location: Oxford, UK.

Re: Stuff and Things.

Post by stephen_usher »

That's a nice little gadget.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.

Return to “MEMBER BLOGS”

Who is online

Users browsing this forum: ClaudeBot, gpt [bot], simon.osborne and 14 guests