The TF4060 Rev2 has been designed, built and its booting. It mostly fixes mistakes with the rev1 like putting the Pi hat on backwards, and a pin direction issue with the IDE interface. It will boot natively from the TF IDE interface without having to loadmodule. The A4000 IDE interface is unaffected, it still works fine. Superficially it looks identical to the Rev1.
i've not tested if DMA is still working but thats on my list to do.
I have managed to get CPU clock switching to happen although there are glitches with it still. That was an Epic PITA to reprogram part of the FPGA fabric at "runtime".
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF4060 Rev2
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
TF4060 Rev2
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Wrangler
- Posts: 13
- Joined: 12 Nov 2020 17:58
Re: TF4060 Rev2
Excellent news! I'm watching this develop with interest!
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
-
alexh
- Site sponsor
- Posts: 1358
- Joined: 17 Oct 2017 16:51
- Location: Oxfordshire
Re: TF4060 Rev2
Thanks for all your hard work.
Senior Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
ST,STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
ST,STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
-
Danoo
- Posts: 250
- Joined: 29 Jan 2020 13:25
- Location: Queensland, Australia
Re: TF4060 Rev2
Great new, thanks for the update :D
Life is really simple, but we insist on making it complicated - Confucius
-
Higgy
- Posts: 489
- Joined: 23 Apr 2019 20:05
- Location: Somerset
Re: TF4060 Rev2
I've now got my 4000 repaired.
@terriblefire you mentioned Amiga's Internal IDE is fine, how is the Boot Priority? Does the TF boot first?
I am probably going to put a CD-ROM on the Amiga's Internal IDE. At the moment I am just using a PC backplane CF card adaptor for easy swapping.
Cheers
@terriblefire you mentioned Amiga's Internal IDE is fine, how is the Boot Priority? Does the TF boot first?
I am probably going to put a CD-ROM on the Amiga's Internal IDE. At the moment I am just using a PC backplane CF card adaptor for easy swapping.
Cheers
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF4060 Rev2
I have no idea. This is a partition table / driver question. Perhaps @erique can answer how RDB/AmigaOS does this.Higgy wrote: 05 Nov 2022 08:08 @terriblefire you mentioned Amiga's Internal IDE is fine, how is the Boot Priority? Does the TF boot first?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
alenppc
- Moderator Team
- Posts: 934
- Joined: 08 Nov 2018 12:59
Re: TF4060 Rev2
Yeah, basically you assign the boot priority to each partition, it doesn't matter which controller it's on.terriblefire wrote: 06 Nov 2022 14:57I have no idea. This is a partition table / driver question. Perhaps @erique can answer how RDB/AmigaOS does this.Higgy wrote: 05 Nov 2022 08:08 @terriblefire you mentioned Amiga's Internal IDE is fine, how is the Boot Priority? Does the TF boot first?
-
Higgy
- Posts: 489
- Joined: 23 Apr 2019 20:05
- Location: Somerset
Re: TF4060 Rev2
@terriblefire do you know if any Amiga37 videos captured the TF4060? I thought you might have been told if there was.
I had a look and there seems no specific videos of hardware on show. There are hours of looking at a empty red sofa!
Cheers
I had a look and there seems no specific videos of hardware on show. There are hours of looking at a empty red sofa!
Cheers
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF4060 Rev2
Many people video'd the TF4060. I've no idea who was who except for AmigaBill. He already had me on his twitch stream talking about it.Higgy wrote: 17 Nov 2022 15:07 @terriblefire do you know if any Amiga37 videos captured the TF4060? I thought you might have been told if there was.
I had a look and there seems no specific videos of hardware on show. There are hours of looking at a empty red sofa!
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: ClaudeBot and 0 guests