Getting ROMs burnt

[PhilC]

I made up a few converter (PLCC-44 to 40 pin DIL) PCBs if anyone's interested in one. I've four left.

I was going to do this myself but looks like you've beat me to it again :)

[JezC]

@stephen_usher I'm interested...not sure how much I trust my bodged adaptor for my TL866... :roll:

[stephen_usher]

If you can PM me I'll see about getting them in the post. They should fit in an envelope and be able to be sent as a normal letter.

If any of you want the KiCAD files and/or Gerbers I can supply those.

[JezC]

If you can PM me I'll see about getting them in the post. They should fit in an envelope and be able to be sent as a normal letter.

If any of you want the KiCAD files and/or Gerbers I can supply those.

Will do that later, thanks...I've only just got through the door at home & don't want to spark a domestic incident!

[DaveC]

Bigs thanks to @Badwolf for burning the ROMs for me.

Added a switch to an Exxos diagnostic cartridge to allow me to bypass the cartridge if needed. Lots of hot snot needed to hold things in place securely.

Couple of videos to show that being used to load Emutos and MonST from the cartridge. Could've done with an extra hand while videoing but all works :lol:

[Badwolf]

Bigs thanks to @Badwolf for burning the ROMs for me.

Added a switch to an Exxos diagnostic cartridge to allow me to bypass the cartridge if needed. Lots of hot snot needed to hold things in place securely.

No worries, glad they work!

Regarding booting EmuTOS from the cartridge -- may I heartily recommend combining that with the standalone AES4.1 kicking around either from the auto folder or run directly from the command prompt. A very nice hybrid OS experience.

BW