You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

TF1230 Beta Interest (Open Source)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

culexus
Posts: 11
Joined: 01 Apr 2021 22:13

Re: TF1230 Beta Interest (Open Source)

Post by culexus »

Thank you supaduper :) I understand allot more after reading your perfect guide. Now I have something to do the next week.
Soldering is easy but the the software stuff and how it works on the amiga side is not my strongest thing.
ICRY
Posts: 23
Joined: 08 Nov 2018 17:26

Re: TF1230 Beta Interest (Open Source)

Post by ICRY »

Thank you superduper for a great guide, just trying to do a custom 3.1 build in winuae & I run out of space for ehide.device

3.1custom.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 663
Joined: 08 Nov 2018 12:05

Re: TF1230 Beta Interest (Open Source)

Post by supaduper »

That guide is for rom 3.2, if you are doing a custom 3.1 then I do mention that you `REMOVE` the Workbench.library from the build List, make sure that you then manually replace the Workbench.library back into Libs on the System disk otherwise it will not work

Download Workbench Library here:
http://www.amigaforever.com/classic/download/
dragmar
Posts: 53
Joined: 06 Aug 2018 08:12

Re: TF1230 Beta Interest (Open Source)

Post by dragmar »

I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip

I tested WHDLOAD games

Tested by internal IDE 1200 and works fine.

I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
terriblefire
Admin sponsor
Admin sponsor
Posts: 5684
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF1230 Beta Interest (Open Source)

Post by terriblefire »

dragmar wrote: 06 Oct 2021 09:47 I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
Which games. We need a little more information. Also try the later beta.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
dragmar
Posts: 53
Joined: 06 Aug 2018 08:12

Re: TF1230 Beta Interest (Open Source)

Post by dragmar »

OS32, WHDLOAD 18.5
lure of the temptress, ishar
markus0321
Posts: 146
Joined: 19 Dec 2020 11:42
Location: Zielona Gora

Re: TF1230 Beta Interest (Open Source)

Post by markus0321 »

dragmar wrote: 06 Oct 2021 09:47 I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip

I tested WHDLOAD games

Tested by internal IDE 1200 and works fine.

I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.

Someone can check it if this is the case.
Try to run MuFastROM from the MMU_libs package from aminet before loading the game. For me, when I run FastROM, the problems with ehide disappear, if I leave it in the ROM memory, it is unstable.
User avatar
AndreaM
Posts: 29
Joined: 21 Jun 2021 16:43

Re: TF1230 Beta Interest (Open Source)

Post by AndreaM »

I have a similar problem with WHDload 18.5 & Dragon Tiles AGA on my TF1260 and the original firmware. Everything else works really well

ehide.device loaded at the beginning of startup-sequence, MuFastROM called from user-startup. I didn't really investigate since the DoM I use won't fit under my keyboard, just went back to the internal IDE and enjoying the rest of the card. :)
a caffeine addict and known hater of mornings that answers to either Andrea or fluffkitten
Avinitlarge
Posts: 51
Joined: 09 Apr 2021 23:15
Location: Rotherham

Re: TF1230 Beta Interest (Open Source)

Post by Avinitlarge »

Which are the best ram chips to use for 128mb? I’ve seen a few different ones mentioned.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: 09 Nov 2018 07:12
Location: Germany

Re: TF1230 Beta Interest (Open Source)

Post by 8 Bit Dreams »

terriblefire wrote: 30 Sep 2021 09:00 <Snip>
Issi "IS42S16320F-7TL" for 128MB: Everything works perfect in all circumstances without errors in WHDLoad.
<Snip>
Retro computer hardware & repair in Germany

Return to “TF330”

Who is online

Users browsing this forum: CCBot and 6 guests