[Video] Building and testing the Smalliermouse (USB mouse adapter for ST and Falcon)

[kodak80]

I just wanted to pass on my thanks for releasing these. I have built up a handful for use with my Atari computers. Even fits in my Mega ST keyboard.

SmallierMouse2-MegaST keyboard.jpg

[DoG]

I have order all the parts and PCB and waiting for them to arrive. So I will also be building up a few of these in a near future.

[Badwolf]

I just wanted to pass on my thanks for releasing these. I have built up a handful for use with my Atari computers. Even fits in my Mega ST keyboard.
SmallierMouse2-MegaST keyboard.jpg

:coolpics:

Thanks! Looks a beauty. I like the white finish.

Cheers,

BW.

[Badwolf]

I have order all the parts and PCB and waiting for them to arrive. So I will also be building up a few of these in a near future.

The 1287s seem to be a bit on the rare side at the moment. I hope you're not waiting until December like I was quoted!

BW

[Steve]

I've got 15x PCBs with me now, so I'll eventually build enough for others who can't solder it up themselves. @DoG @kodak80 do you guys have an easy mouser/farnell saved shopping list of parts you could share with me? Cheers

[DoG]

I have order all the parts and PCB and waiting for them to arrive. So I will also be building up a few of these in a near future.

The 1287s seem to be a bit on the rare side at the moment. I hope you're not waiting until December like I was quoted!

I just order a bunch of parts from DigiKey but totally forgot that I had ordered these PCB, so no parts for this project was added. But I got all of the parts anyway, I think, except the IC of course.

I got dodgy IC from eBay, so I don't have high hope for them. Initially I was just ordering the PCBs and thought that it was going to be a fun little project in the future.

[kodak80]

I've got 15x PCBs with me now, so I'll eventually build enough for others who can't solder it up themselves. @DoG @kodak80 do you guys have an easy mouser/farnell saved shopping list of parts you could share with me? Cheers

Here is the list of Mouser parts but they seem to go out of stock quickly.

Code: Select all

Item	Qty	Reference(s)		Value		Footprint									Mouser Part No
1	2	C1,C2			22pF		Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder			77-VJ0805A220JXAMC
2	5	C3,C5,C6,C7,C8		100nF		Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder			581-08055C104KAT4A
3	1	C4			1uF		Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder			187-CL21F105ZAFNNNE 
4	1	IC1			AT90USB1287	Package_QFP:TQFP-64_14x14mm_P0.8mm						556-AT90USB1287-AU
5	1	J2			Slow/Fast	Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical	
6	1	J3			DB9_Female	Connector_Dsub:DSUB-9_Female_EdgeMount_P2.77mm					426-FIT0109 
7	1	J5			Bootloader	Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical	
8	1	P1			USB_A		Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal				649-87583-2010BLF
9	2	R1, R2			22R		Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder			71-CRCW080522R1FKEAC
10	2	R3, R4			10K		Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder			603-RC0805FR-0710KL
11	1	Y1			16 MHz Crystal	Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering				774-445A32D16M00000

Note. I ordered the DB9 connectors from a local seller on eBay and did not order the ones listed above.

[Badwolf]

Here is the list of Mouser parts but they seem to go out of stock quickly.

Hi @kodak80, thanks for this! May I add it to the repository?

Thanks,

BW.

[Steve]

@kodak80 thank you very much :)

[kodak80]

Here is the list of Mouser parts but they seem to go out of stock quickly.

Hi @kodak80, thanks for this! May I add it to the repository?

Thanks,

BW.

Sure, go for it.