Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

TF1230 Beta Interest (Open Source)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Danoo
Posts: 250
Joined: Wed Jan 29, 2020 1:25 pm
Location: Queensland, Australia

Re: TF1230 Beta Interest (Open Source)

Post by Danoo »

Nice Lab, lots of space with a mirror to capture periods of triumph and frustration. :lol:
Life is really simple, but we insist on making it complicated - Confucius
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230 Beta Interest (Open Source)

Post by terriblefire »

Danoo wrote: Mon Aug 23, 2021 10:24 pm Nice Lab, lots of space with a mirror to capture periods of triumph and frustration. :lol:
Thats not a mirror. Although people have been confused looking at it in person .
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
ICRY
Posts: 23
Joined: Thu Nov 08, 2018 5:26 pm

Re: TF1230 Beta Interest (Open Source)

Post by ICRY »

Hello I might be late to the party but I would like to be a beta tester if possible.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF1230 Beta Interest (Open Source)

Post by 8 Bit Dreams »

My JLC order arrived finally...

IMG_20210824_204248.jpg
IMG_20210824_204248.jpg (222.1 KiB) Viewed 3537 times

Built two: one with ISSI, and one with cheap Samsung RAM like used on TF330..🤔


@terriblefire
Where can i get Firmware for them, Sir? :P
Retro computer hardware & repair in Germany
Higgy
Posts: 489
Joined: Tue Apr 23, 2019 8:05 pm
Location: Somerset

Re: TF1230 Beta Interest (Open Source)

Post by Higgy »

@8 Bit Dreams try here:

*SNIP*

EDIT BY TF:Thats the wrong one. Its been supplied
centuriontech

Re: TF1230 Beta Interest (Open Source)

Post by centuriontech »

Higgy wrote: Tue Aug 24, 2021 9:33 pm @8 Bit Dreams try here:

*SNIP*

EDIT BY TF:Thats the wrong one. Its been supplied
I wonder that myself, sorry if I missed something. I thought it was a part of tf1230r1_archive.zip archive, but nope :) Could you please post it?
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230 Beta Interest (Open Source)

Post by terriblefire »

centuriontech wrote: Wed Aug 25, 2021 5:50 am
Higgy wrote: Tue Aug 24, 2021 9:33 pm @8 Bit Dreams try here:

*SNIP*

EDIT BY TF:Thats the wrong one. Its been supplied
I wonder that myself, sorry if I missed something. I thought it was a part of tf1230r1_archive.zip archive, but nope :) Could you please post it?
I thought that since you’re such an expert you’d write your own for stability.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: Thu Nov 08, 2018 12:05 pm

Re: TF1230 Beta Interest (Open Source)

Post by supaduper »

For continuity goose sent me a board and built it with the same components as the Tf330 and the results are in:)...both my 1D4 1200s give a mustard screen, but the 2b A1200 no probs runs like a good un` , thought I would just throw these resullts into the mix, but a awesome little board steve :)
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1371
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF1230 Beta Interest (Open Source)

Post by arkadiusz.makarenko »

What is so special about 1D4 boards?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
Higgy
Posts: 489
Joined: Tue Apr 23, 2019 8:05 pm
Location: Somerset

Re: TF1230 Beta Interest (Open Source)

Post by Higgy »

I don't think we have any results for 1B boards yet?
Post Reply

Return to “TF330”