H5C1 BOM

[exxos]

Whats required now to implement the S2 Midi Synth? do we still need the amp board or is it good to go?

Should be good to go, just plug it in, of course the new amp has not been tested on the H5C1 yet.. There was a basic copy of the amp board anyway but still... :lol: :hide:

[PhilC]

@exxos ok, will add it to the list to try.

[StealthGunner385]

@StealthGunner385 ST chipset only supports TOS104,TOS102 DUALTOS, but I don't suggest them as I am actually discontinuing that combination. It's why I am suggesting the TOS104, TOS206 ROMs. Then at least if you decide to use the decoder board, you already have TOS206 ROM ready for it.

The reason I asked about the ROM is because the URL in the first post leads to the TOS162/206 ROM (what I understand is the STE-compatible ROMs), which confused me for a moment.

Thanks for the clarification, I'll be getting the 104/206 and decoder. :mrgreen:

[exxos]

The reason I asked about the ROM is because the URL in the first post leads to the TOS162/206 ROM (what I understand is the STE-compatible ROMs), which confused me for a moment.

oops my bad sorry, just corrected it!

[alienkidmj12]

if we want to use a falcon 030 memory board, which kind of board header do we need, i understand it is 30 pin (2x15) and 50 pin (2x25)

thanks

dave

[alienkidmj12]

also whats this midi module people speak of, sounds interesting. with the h5 i guess i just need the module itself and no further mod :)

[exxos]

if we want to use a falcon 030 memory board, which kind of board header do we need, i understand it is 30 pin (2x15) and 50 pin (2x25)

I just use normal header strips and cut them to size.

https://www.exxosforum.co.uk/atari/store2/#0158

[exxos]

also whats this midi module people speak of, sounds interesting.

https://www.exxosforum.co.uk/forum/viewt ... =89&t=3614

[alienkidmj12]

what do you call those plastic things you use to join purple and grey cable on psu, looked high and low. found nothing similar.

[exxos]

Bullet crimps I think..