Managed to do 22 sets ( 88 simms) . A few were a bit over cooked, so PCB is slightly discoloured on some of them, but will have to try a lower temp next time.. In anycase, they all been on test for a long time. I'm starting to run out of DRAM and its getting harder to find now. So unfortunately the price is going to be creeping up on future batches. I will try and keep them in stock while they are selling, though I think over the next year (maybe 2 they are probably going to become to expensive to produce :( .
CURRENT STOCK STATUS
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
PGA 128 pin sockets, been busy all morning packing some more up as ran out of them... 61 now in stock!
https://www.exxosforum.co.uk/atari/store2/#0181
https://www.exxosforum.co.uk/atari/store2/#0181
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
TOS206 decoder boards starting to appear back in stock..
https://www.exxosforum.co.uk/atari/store2/#0172
https://www.exxosforum.co.uk/atari/store2/#0172
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
FALCON RTC modules starting to appear back in stock
https://www.exxosforum.co.uk/forum/viewt ... 870#p57755
https://www.exxosforum.co.uk/atari/store2/#0089
https://www.exxosforum.co.uk/forum/viewt ... 870#p57755
https://www.exxosforum.co.uk/atari/store2/#0089
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
I was looking at the capacitor kits which have mostly gone out of stock now, the problem is I cannot get the same rectifiers as before as they are out of stock everywhere :roll: There are more expensive brands, but in order to keep items in stock the price will just have to be increased.
Part shortages it is starting to become a real problem now :( I will try find the best value parts, but I cannot spend endless hours clicking around websites because my fingers just hurt too much at the moment.
Part shortages it is starting to become a real problem now :( I will try find the best value parts, but I cannot spend endless hours clicking around websites because my fingers just hurt too much at the moment.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
PSU re-cap kits are now back in stock.
As mentioned previously, the DUALTOS ROMs are greatly increasing in cost because the chips have become a lot more expensive to buy recently. I am only increasing the price when the stock runs out, so currently a lot of the chips are still at £12. The English STE 1.62 / 206 ROMs are now the second ROMs to increase in price.
As mentioned before I am discontinuing a lot of the ROM combinations because they are just becoming too expensive to keep every variation in stock any more.
As mentioned previously, the DUALTOS ROMs are greatly increasing in cost because the chips have become a lot more expensive to buy recently. I am only increasing the price when the stock runs out, so currently a lot of the chips are still at £12. The English STE 1.62 / 206 ROMs are now the second ROMs to increase in price.
As mentioned before I am discontinuing a lot of the ROM combinations because they are just becoming too expensive to keep every variation in stock any more.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
I'm hoping the STFM video recap kits will be back in stock very soon.
Also the TF536 REV2s will be back in stock in a few days.
Also the TF536 REV2s will be back in stock in a few days.
-
exxos
- Site Admin

- Posts: 28365
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: CURRENT STOCK STATUS
The first post has been updated somewhat for current stock status.
TOS 102/104 ROMs are being discontinued in favour for the TOS104/206 ROMs. It's mainly because the ROM chips have greatly increased in price lately, but also as are not very popular either.
Some ROM prices may be listed in the store higher price than others, this is because I am only increasing the price when I start a new batch. I find this fairer than ramping the price on every chip all at once as I didn't pay more for those chips.
Prices and availability will likely be suffering over the next year because of parts shortages. I am trying to find the best deals on parts to keep the prices around what they are all now, but this is taking a incredible amount of time lately.
Also because Covid restrictions are ending, my day job is taking priority these days ( I have bills to pay!) so my time for working on Atari stuff has been and will be, greatly limited for some time.
TOS 102/104 ROMs are being discontinued in favour for the TOS104/206 ROMs. It's mainly because the ROM chips have greatly increased in price lately, but also as are not very popular either.
Some ROM prices may be listed in the store higher price than others, this is because I am only increasing the price when I start a new batch. I find this fairer than ramping the price on every chip all at once as I didn't pay more for those chips.
Prices and availability will likely be suffering over the next year because of parts shortages. I am trying to find the best deals on parts to keep the prices around what they are all now, but this is taking a incredible amount of time lately.
Also because Covid restrictions are ending, my day job is taking priority these days ( I have bills to pay!) so my time for working on Atari stuff has been and will be, greatly limited for some time.
Who is online
Users browsing this forum: ClaudeBot and 5 guests