The TF1200 Design Complete
Moderators: terriblefire, Terriblefire Moderator
-
PaulJ_2.0
- Posts: 571
- Joined: 11 May 2019 23:32
Re: The TF1200 Design Underway (I must be insane)
Oooh now then. An AGA Vampire Slayer.
This is getting interesting.
This is getting interesting.
-
ubermick
- Posts: 22
- Joined: 05 Mar 2021 06:32
Re: The TF1200 Design Underway (I must be insane)
Needs to have RTG included just to really annoy people.
And an FPU. Obviously.
And an FPU. Obviously.
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF1200 Design Underway (I must be insane)
Haha. Well I hope to get deeper into it today
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF1200 Design Underway (I must be insane)
Ok it's routed.
As many of you have guessed this is so that Buffee can run in an A1200. I plan to give a limited number of these away free with Buffee purchases once its all confirmed working.
As many of you have guessed this is so that Buffee can run in an A1200. I plan to give a limited number of these away free with Buffee purchases once its all confirmed working.
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
Re: The TF1200 Design Underway (I must be insane)
Very nice work =D I guess this (and the PiStorm) are going to shake things up!
My YouTube Channel - www.youtube.com/GadgetUK164
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF1200 Design Underway (I must be insane)
I found an appropriate image to add to the silkscreen
I was looking for a simple chip to 4 x multiply the Amiga 14Mhz clock with .... and found this...
https://www.mouser.co.uk/ProductDetail/ ... 2nrQ%3D%3D
The product code/Manufacturer ID made me choke...
I was looking for a simple chip to 4 x multiply the Amiga 14Mhz clock with .... and found this...
https://www.mouser.co.uk/ProductDetail/ ... 2nrQ%3D%3D
The product code/Manufacturer ID made me choke...
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Chrissy
- Posts: 10
- Joined: 06 Jan 2020 20:12
Re: The TF1200 Design Underway (I must be insane)
Fantastic, i guess i need to start to look for a connector. Or desolder the one from my apollo 8mb ram card if not 😂🤣😂
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF1200 Design Underway (I must be insane)
Although this card is only 24 bit address bus ... remember buffee will be able to do 32 bit address space internally and *MUCH* faster. Its not like the upper 8 bits on the A1200 are connected to anything anyways.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Maximilian
- Posts: 407
- Joined: 28 Feb 2019 17:02
Re: The TF1200 Design Underway (I must be insane)
Renesas had some fun with that, or they were so serious that they didn't even notice that they started with .... in the datasheet.
Nice find, the only problem is they only have 36 of them in stock and Renesas just had a fire on March 19 in one of their facilities:
https://www.renesas.com/us/en/about/pre ... ctory-fire
Count me in for the test, I'll have a recapped A1200 on standby :D
-
terriblefire
- Admin sponsor

- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: The TF1200 Design Underway (I must be insane)
Yeah i need to find a cheap 4x multiplier that has good stock first.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: alenppc, ClaudeBot and 5 guests