Hi,
I ve just finished my 1st build.
How can I program the Xilinx controller - Raspberry is available.
I ve got a Revision 2B Board, but only find a Alpha Firmware at Github.
Any help is being appreciated - sorry for my beginner question :)
TF536 Programming
Moderators: terriblefire, Terriblefire Moderator
-
stephen_usher
- Site sponsor
- Posts: 7376
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: TF536 Programming
Save yourself the heart break of frying the Xilinx chip and get yourself one of these:
https://www.amazon.co.uk/Waveshare-Comp ... ast_sto_dp
It'll work with the Pi and the software mentioned in the documentation but it'll be a lot safer.
https://www.amazon.co.uk/Waveshare-Comp ... ast_sto_dp
It'll work with the Pi and the software mentioned in the documentation but it'll be a lot safer.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
ninjafahrer
- Posts: 29
- Joined: 17 Jul 2020 14:20
Re: TF536 Programming
Ok, great hint - I ve ordered one.
Can you point me as well to the last Firmware please?
Can you point me as well to the last Firmware please?
-
stephen_usher
- Site sponsor
- Posts: 7376
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: TF536 Programming
Amiga or Atari? I don't know where the Amiga firmware is, but you should be able to search the forum and find the posting pointing to it.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
Lemaru
- Posts: 86
- Joined: 08 Feb 2020 21:28
Re: TF536 Programming
There's a firmware section on this forum. Latest firmwares can be found there
https://www.exxosforum.co.uk/forum/viewforum.php?f=93
https://www.exxosforum.co.uk/forum/viewforum.php?f=93
-
frank.lukas
- Posts: 812
- Joined: 19 Jan 2018 11:52
Re: TF536 Programming
Can anyone in germany program my TF536 ?
PM me ...
PM me ...
-
PhilC
- Moderator
- Posts: 7442
- Joined: 23 Mar 2018 20:22
Re: TF536 Programming
Hi Frank, the card I've sent you has the latest firmware or is this another card?
If it ain't broke, test it to Destruction.
-
frank.lukas
- Posts: 812
- Joined: 19 Jan 2018 11:52
Re: TF536 Programming
Yes but I have a 1040ST Mainboard with a LightningST and my IDE Port do not longer work. So I need a Firmware with TF IDE disable. My greater Problem is that the TF536 do not work with my PuPla/Panther. And that is a no go ...PhilC wrote: 11 Dec 2020 13:05Hi Frank, the card I've sent you has the latest firmware or is this another card?
-> https://forum.atari-home.de/index.php/t ... 556.0.html
-
ninjafahrer
- Posts: 29
- Joined: 17 Jul 2020 14:20
Re: TF536 Programming
Hi,
today the XILINX Platform Cable DLC9LP arrived.
Totally exited I was able to install the ISE iMPACT on my W10 x64 machine,
but now I am really grounded with the software.
Starting iMPACT 64 it opens, clicking "Initialize chain" it shows the correct chip
on both TF536 I ve build, it askes for the JED files (I hope tf536r2_main_top_FULL_PHASE7 is correct)
and shows them as well, but afterwards no dialog to program the chip...
Is there some magic I am missing?
today the XILINX Platform Cable DLC9LP arrived.
Totally exited I was able to install the ISE iMPACT on my W10 x64 machine,
but now I am really grounded with the software.
Starting iMPACT 64 it opens, clicking "Initialize chain" it shows the correct chip
on both TF536 I ve build, it askes for the JED files (I hope tf536r2_main_top_FULL_PHASE7 is correct)
and shows them as well, but afterwards no dialog to program the chip...
Is there some magic I am missing?
-
ninjafahrer
- Posts: 29
- Joined: 17 Jul 2020 14:20
Re: TF536 Programming
the last dialogue I am getting is in the attached picture
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: Baidu [Spider], ClaudeBot and 4 guests