REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

TF536 Atari firmware

Other boosters or variants.
User avatar
agranlund
Site sponsor
Site sponsor
Posts: 1763
Joined: 18 Aug 2019 22:43
Location: Sweden

Re: TF536 Atari firmware

Post by agranlund »

czietz wrote: 24 Nov 2020 16:45 Sidenote: The Atari / TOS also requires "write allocate" to be active on the 68030 or it will crash sooner or later. I could go into a (long) explanation why this happens, but for now I'm just going to quote the UM: "WRITE ALLOCATE [...] The supervisor should set this bit when it shares data with the user task". I.e., it's required when user and supervisor mode access the same memory locations, which obviously happens during TOS calls.
Thanks! That's enough of an explanation for me :)
czietz wrote: 24 Nov 2020 16:45 Either use a cache-aware OS or completely disable the cache.
I'm giving this quote a million thumbs up!
Atarian Computing
Posts: 581
Joined: 22 Aug 2017 04:27

Re: TF536 Atari firmware

Post by Atarian Computing »

I couldn't find any information by searching. Does the TF536 support two IDE devices, i.e. primary and secondary?
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 Atari firmware

Post by terriblefire »

Atarian Computing wrote: 01 Dec 2020 11:05 I couldn't find any information by searching. Does the TF536 support two IDE devices, i.e. primary and secondary?
Thats supported by the master IDE device not the port itself.

e.g. Master slave.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

Return to “EVERYTHING ELSE”

Who is online

Users browsing this forum: ClaudeBot and 3 guests