REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

Amiga 2000 / 600 Accelerator Cards

General hardware issues and troubleshooting etc

Moderators: terriblefire, Terriblefire Moderator

GianDO
Posts: 60
Joined: 10 Oct 2020 23:25

Re: Amiga 2000 / 600 Accelerator Cards

Post by GianDO »

terriblefire wrote: 09 Nov 2020 18:27
GianDO wrote: 09 Nov 2020 18:26 As @ 8 Bit Dreams I can't find he. Are these cards made only by him?
He's a moderator on this forum. I dont know who make the TK cards it changes all the time.
But is it possible to contact Matze (aka Matthias Heinrichs) directly?
A2000 - MC68000 - KS3.1 - WB 3.1 - 2MB ChipRAM - Impact A2000-HC+8 Series II - 8 MB FastRAM - SD2SCSI 16GB - Indivision ECS
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Amiga 2000 / 600 Accelerator Cards

Post by terriblefire »

GianDO wrote: 09 Nov 2020 18:39 But is it possible to contact Matze (aka Matthias Heinrichs) directly?
Pass. I dont know if he makes his cards. I never made mine for example.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
GianDO
Posts: 60
Joined: 10 Oct 2020 23:25

Re: Amiga 2000 / 600 Accelerator Cards

Post by GianDO »

terriblefire wrote: 09 Nov 2020 18:27
GianDO wrote: 09 Nov 2020 18:26 As @ 8 Bit Dreams I can't find he. Are these cards made only by him?
He's a moderator on this forum. I dont know who make the TK cards it changes all the time.
Hi,
last night I wrote to 8 Bit Dreams in pv because I saw that he responded in some posts. I also hope for an answer.
A2000 - MC68000 - KS3.1 - WB 3.1 - 2MB ChipRAM - Impact A2000-HC+8 Series II - 8 MB FastRAM - SD2SCSI 16GB - Indivision ECS
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: Amiga 2000 / 600 Accelerator Cards

Post by terriblefire »

GianDO wrote: 10 Nov 2020 11:15 Hi,
last night I wrote to 8 Bit Dreams in pv because I saw that he responded in some posts. I also hope for an answer.
If you dont get an answer I dont think you will get one. I dont know of anyone else building these cards.

Most people have realized that the FPU is pretty useless.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."

Return to “AMIGA HARDWARE HELP”

Who is online

Users browsing this forum: ClaudeBot and 2 guests