Although the plain ST version of this looks like it will run on my machine I get this message:
If I double tap the INSTALL.PRG I see this screen:
I don't get it, because according to this I don't need one:
Does anyone know how to get this to run or have a key? (since I can't find anywhere to buy the software. I've even looked)
It's imperative that I take a sample of Barry Manilow and reverse, chop and pitch shift the audio to place it on top of less 'happy' chords. :lol:
P.S. I have lockdown fever and am slowly going insane.
Thought about walking outside with a toilet roll over each eye, looking through the cardboard centre... :cussing:
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
ZERO-X VERSION 1.51 Help Needed!
-
Cosmic Puppet
- Posts: 1734
- Joined: 02 Aug 2019 01:03
- Location: Angus!
ZERO-X VERSION 1.51 Help Needed!
You do not have the required permissions to view the files attached to this post.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
exxos
- Site Admin

- Posts: 28614
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ZERO-X VERSION 1.51 Help Needed!
have you tried just typing in a load of 1's or something ?
-
Cosmic Puppet
- Posts: 1734
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: ZERO-X VERSION 1.51 Help Needed!
I tried zeros. Trying 1's now.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
Cosmic Puppet
- Posts: 1734
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: ZERO-X VERSION 1.51 Help Needed!
Got an Installation Successful yet get blocked again when I relaunch the program.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
exxos
- Site Admin

- Posts: 28614
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ZERO-X VERSION 1.51 Help Needed!
Try deleting KEY.DAT and ZERO_X.CFG and starting again...Cosmic Puppet wrote: 02 Nov 2020 19:29 Got an Installation Successful yet get blocked again when I relaunch the program.
-
Cosmic Puppet
- Posts: 1734
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: ZERO-X VERSION 1.51 Help Needed!
Still knocks it back.exxos wrote: 02 Nov 2020 19:30Try deleting KEY.DAT and ZERO_X.CFG and starting again...Cosmic Puppet wrote: 02 Nov 2020 19:29 Got an Installation Successful yet get blocked again when I relaunch the program.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
mrbombermillzy
- Moderator

- Posts: 2347
- Joined: 03 Jun 2018 19:37
Re: ZERO-X VERSION 1.51 Help Needed!
If you are still looking, I THINK I have version 2.0 Pro installed on my TT drive somewhere, which IIRC isnt a demo version.
However, I think its a 030 only version, but you are more than welcome to have a copy. :D
However, I think its a 030 only version, but you are more than welcome to have a copy. :D
-
Cosmic Puppet
- Posts: 1734
- Joined: 02 Aug 2019 01:03
- Location: Angus!
Re: ZERO-X VERSION 1.51 Help Needed!
That's so kind of you to offer. Unfortunately I tried this today from the Atari Music Network Archive and it bombed.mrbombermillzy wrote: 02 Nov 2020 22:45 If you are still looking, I THINK I have version 2.0 Pro installed on my TT drive somewhere, which IIRC isnt a demo version.
However, I think its a 030 only version, but you are more than welcome to have a copy. :D
Really appreciate the gesture though. 8-)
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
https://thecosmicpuppets.bandcamp.com/releases My released music so far...
-
Steve
- Moderator

- Posts: 3334
- Joined: 15 Sep 2017 11:49
Re: ZERO-X VERSION 1.51 Help Needed!
@Cosmic Puppet
I found this thread on atari-forum with the same problem:
https://www.atari-forum.com/viewtopic.php?t=19170
Solarichi said: "Discovered ZeroX 1.51 crack wont load unless i unplug my MIDEX & cubase dongle. At least ive sussed it! Working lovely..."
also Malkav30 said:
"Hi,
For the record, I gave up on my MSTE with this, version, and got in touch with copson through the aforementioned site. He still sells Zero-X, I bought the 2.0 STe version (which really exists, btw) directly from him.
It works flawlessly on steem and on my machines."
And that was in 2020.. so perhaps you *can* buy it still...
Also note there are *2* uploads of the program in this thread, one in the first post and one a little further down which someone had luck with. I can download/re-upload them here if you don't have an AF account.
I found this thread on atari-forum with the same problem:
https://www.atari-forum.com/viewtopic.php?t=19170
Solarichi said: "Discovered ZeroX 1.51 crack wont load unless i unplug my MIDEX & cubase dongle. At least ive sussed it! Working lovely..."
also Malkav30 said:
"Hi,
For the record, I gave up on my MSTE with this, version, and got in touch with copson through the aforementioned site. He still sells Zero-X, I bought the 2.0 STe version (which really exists, btw) directly from him.
It works flawlessly on steem and on my machines."
And that was in 2020.. so perhaps you *can* buy it still...
Also note there are *2* uploads of the program in this thread, one in the first post and one a little further down which someone had luck with. I can download/re-upload them here if you don't have an AF account.
-
frank.lukas
- Posts: 812
- Joined: 19 Jan 2018 11:52
Re: ZERO-X VERSION 1.51 Help Needed!
ZERO_XST.PRG 1..51 works very well on my Mega STE over a ET4000 Graphiccard at 2 Colors. Version 2.0 works well on my Atari TT also over a Graphiccard in 2 Colors. I can load AIFF Files export form iTunes ...
Who is online
Users browsing this forum: Acsi, ClaudeBot and 3 guests