Forgot to do an intro post, so time to remedy that!
I started on Commodore 64, and moved on to my first Atari, 520ST, in '87. My father started an advertising agency around the same time, and I ended up helping, using a nice Mega 4 and Moniterm setup with Calamus and LaserJet 3 if I remember correctly. I have also done some music back in the day, but primarily C and assembler programming for fun. Used an ST as a main machine until '93 when some online store was selling Amiga 3000s for dirt cheap.
Came back to C64 about 10 years ago, and just recently rekindled my interest in the ST. Went from nothing to three machines and am having a blast modding them, upgrading and programming!
Hello from Charlotte, USA
-
rubber_jonnie
- Site Admin
- Posts: 14888
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: Hello from Charlotte, USA
:welcomewave:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
JezC
- Posts: 2782
- Joined: 28 Aug 2017 23:44
Re: Hello from Charlotte, USA
:swave:
Welcome on board!
Welcome on board!
-
Icky
- Site Admin
- Posts: 4374
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Hello from Charlotte, USA
:welcomewave:
-
tony.reynolds
- Posts: 34
- Joined: 06 Apr 2020 03:54
Re: Hello from Charlotte, USA
Welcome- from Richmond VA ;)
;Manually change to secret room.
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
LDA #$1E ;Set room to secret room. ;2
STA VSYNC,X ;And make it current. ;4
LDA #$03 ;Set the X coordinate.;2
STA VBLANK,X ;4
JMP MovementReturn ;And Exit. ;3
-
weav
- Posts: 35
- Joined: 13 May 2020 02:01
Re: Hello from Charlotte, USA
Welcome from Lexington, KY! Small world :D
Who is online
Users browsing this forum: ClaudeBot and 5 guests