Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF536 on the ST
Re: TF536 on the ST
The image you have that works with EmuTOS will likely need to be byte swspped to work with Tos2.06 IIRC but I will try and look into it ASAP. Been away, so not much help, apologies.
If it ain't broke, test it to Destruction.
Re: TF536 on the ST
IIRC TOS 2.06 is restricted to 512Mb partitions which was raised to 2Gb for 4.04.
BW
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
-
Umberto1st
- Posts: 105
- Joined: Wed Sep 27, 2017 6:27 pm
Re: TF536 on the ST
With previous firmware's (until the very last one posted), the drives will mount on both TOS 2.06 and Emutos, but only emutos auto boots. I have always used a byte swapped ide cable.
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
-
Umberto1st
- Posts: 105
- Joined: Wed Sep 27, 2017 6:27 pm
Re: TF536 on the ST
1 gig on 4.04 unless your using bigdos, mint or magicBadwolf wrote: Tue Aug 04, 2020 5:40 pm IIRC TOS 2.06 is restricted to 512Mb partitions which was raised to 2Gb for 4.04.
BW
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
-
Umberto1st
- Posts: 105
- Joined: Wed Sep 27, 2017 6:27 pm
Re: TF536 on the ST
1 gig partions 14 total partitions
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 on the ST
I'm interested to know if anyone has ever got a TF536 IDE working with a patch wire on plain TOS 2.06?
Because i think the ST IDE interface is byte swapped and i dont think it will ever work using the internal drive routines. I could be wrong but i think i'm fighting more than the INT cable here.
Because i think the ST IDE interface is byte swapped and i dont think it will ever work using the internal drive routines. I could be wrong but i think i'm fighting more than the INT cable here.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF536 on the ST
I don't know if it is the same code for IDE as in 534? @agranlund got his IDE working by doing some hardware mod on a cable and talked a bit about that in the post.terriblefire wrote: Tue Aug 04, 2020 5:57 pm I'm interested to know if anyone has ever got a TF536 IDE working with a patch wire on plain TOS 2.06?
Because i think the ST IDE interface is byte swapped and i dont think it will ever work using the internal drive routines. I could be wrong but i think i'm fighting more than the INT cable here.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 on the ST
Thanks!
Yeah it will need that cable to ever work on a TF536. Seems to tie up to what i have seen on the LA!
So yes it would need that cable to work on plain TOS.
Yeah it will need that cable to ever work on a TF536. Seems to tie up to what i have seen on the LA!
So yes it would need that cable to work on plain TOS.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Umberto1st
- Posts: 105
- Joined: Wed Sep 27, 2017 6:27 pm
Re: TF536 on the ST
Both the 534 and 536 have required a byte swapped cable to be seen by TOS 2.06 and Emutos and TOS2.06 has never auto booted even with INT connectedterriblefire wrote: Tue Aug 04, 2020 6:12 pm Thanks!
Yeah it will need that cable to ever work on a TF536. Seems to tie up to what i have seen on the LA!
So yes it would need that cable to work on plain TOS.
Correction: the 534 does auto boot tos 2.06
3)1040 stf/m, 2)Mega 4 ST, 1)STE, 1)Mega STE, 1)STacy, 2)Falcon 030
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF536 on the ST
This is wrong. EmuTOS does not need a byte swap. It autodetects. I am using it right now without a swap cable.Umberto1st wrote: Tue Aug 04, 2020 6:17 pm Both the 534 and 536 have required a byte swapped cable to be seen by TOS 2.06 and Emutos and TOS2.06 has never auto booted even with INT connected
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."