REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

TF536 rev 2b on A1000

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: 08 Nov 2018 12:59

TF536 rev 2b on A1000

Post by alenppc »

The card works perfectly on the A1000 with the kickstart adapter. I am using this one: https://www.amigalove.com/viewtopic.php?t=540

It is a _very_ tight fit but I was able to put back the floppy, the metal shield and to close the case with everything still working! *phew*

I needed one additional 68k riser to lift the card above the daughterboard, and also had to put a piece of plastic between the bottom of the 536 and the daughterboard so they don't end up shorting accidentally, but having said that it works great.
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 rev 2b on A1000

Post by terriblefire »

Excellent to know. I have one of those but i need to get around to re-assembling my A1000.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
EzdineG
Posts: 68
Joined: 12 Nov 2018 17:19

Re: TF536 rev 2b on A1000

Post by EzdineG »

@alenppc
Did you have to solder the 68030 directly to the TF536 to get the shield back on?

It’s all a bit too tight with the dual kickstart version, so I assume this was with the single?
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF536 rev 2b on A1000

Post by terriblefire »

There was plenty of height IIRC. its the fit with the floppy that looks tight.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: 08 Nov 2018 12:59

Re: TF536 rev 2b on A1000

Post by alenppc »

EzdineG wrote: 16 Jul 2020 16:13 @alenppc
Did you have to solder the 68030 directly to the TF536 to get the shield back on?

It’s all a bit too tight with the dual kickstart version, so I assume this was with the single?
Yes, single kickstart, to be honest I have never seen the point of dual Kickstarts considering you can load them all from the flash card when needed. Back in the day when we had 1 MB ram it made sense. Today it makes no sense at all.

The CPU is socketed so no headroom issues. The biggest issue is wrapping the floppy cable around the board and folding the CF card cable in the right way.

Oh and the boot time is about 15 seconds...
mlenardon
Posts: 1
Joined: 11 Mar 2020 13:39

Re: TF536 rev 2b on A1000

Post by mlenardon »

Wow I think I will try your accelerator in my second A1000. I use a 520 Classic on my other A1000.

Michael
EzdineG
Posts: 68
Joined: 12 Nov 2018 17:19

Re: TF536 rev 2b on A1000

Post by EzdineG »

alenppc wrote: 16 Jul 2020 16:24 Yes, single kickstart, to be honest I have never seen the point of dual Kickstarts considering you can load them all from the flash card when needed. Back in the day when we had 1 MB ram it made sense. Today it makes no sense at all.
A Diagrom/3.1 combo makes a lot of sense here, especially if you’re testing cards. Even if not, 1.3/3.1 gives you that ability to return that 1000 to it’s native OS and boot old floppies.

Return to “TF536”

Who is online

Users browsing this forum: ClaudeBot and 1 guest