TF536 Bulk Order (Batch 1 Shipped)

[Danoo]

You need more more flux on that noggin so it will flow correctly

[terriblefire]

Come on guy's!!! Enjoy it!

Soldering is a means to an end for me. If i could get the boards fully assembled in the mail I would. It would eliminate some of the potential problems of bringing up a new system.

[PhilC]

The last two just arrived, thanks.

And apologies cos I know it'll make you repeat yourself @terriblefire but does the Atari firmware as is fit onto a 144 as well as a 288? Just checking as I have two spare 144s

[GadgetUK164]

Come on guy's!!! Enjoy it!

Haha =D I prefer not to solder on small stuff on the underside - so many little components!!!

[terriblefire]

The last two just arrived, thanks.

And apologies cos I know it'll make you repeat yourself @terriblefire but does the Atari firmware as is fit onto a 144 as well as a 288? Just checking as I have two spare 144s

The basic Atari firmware does.. However once we get the interrupt injection code working expect that to need a 288.

[PhilC]

The basic Atari firmware does.. However once we get the interrupt injection code working expect that to need a 288.

Thanks for confirming that, I'll keep the 144s for another time then

[carmonster]

My board arrived yesterday thanks!!

Forgive me for being a little blind as it seems that I can only see things that are under a microscope these days !!
Where can I find the latest firmware for these boards , ive looked on github/ tf536/ just the rev 1 files are there?

Regards Rich

[terriblefire]

My board arrived yesterday thanks!!

Forgive me for being a little blind as it seems that I can only see things that are under a microscope these days !!
Where can I find the latest firmware for these boards , ive looked on github/ tf536/ just the rev 1 files are there?

Regards Rich

https://github.com/terriblefire/terribl ... ster/tf536

[carmonster]

My board arrived yesterday thanks!!

Forgive me for being a little blind as it seems that I can only see things that are under a microscope these days !!
Where can I find the latest firmware for these boards , ive looked on github/ tf536/ just the rev 1 files are there?

Regards Rich

https://github.com/terriblefire/terribl ... ster/tf536

Thank You!!

[katarakt]

I figured out some bug in the two BOMs.

In the first post Stephen wrote to complete the build "2. 2 x 10uF 1206 Caps.", but both BOMs (Bom_TF536.csv and Bom_TF536_Buffered.csv) there are 10x 10uF 1206 Caps ?! Should be two to complete populated boards ?