Robson’s

[Robson]

The DMA fix board arrived thanks to @DoG and it's now installed.

I've also done the 1.44 mod and installed the gotek as described here:
https://exxosforum.co.uk/forum/viewtopic.php?f=78&t=2551

The bootloader comes on but after displaying the fw version I get the Error: LBA change Test Failed! Write Issue? message.

It works when I set everything back to default.

Any ideas?

IMG_7151.JPG (268.77 KiB) Viewed 7328 times

[kodak80]

I don't believe that this issue was resolved and might be worth asking on the FF Github pages.

I don't use the HxC Autoboot HFE tool. Instead, I use and OLED and then use the Gotek buttons to load disk images.

[Robson]

IDE is now working. The DMA fix slightly pushes the DOM up. I'll lower it at some point.

IMG_7220.JPG (324.19 KiB) Viewed 7275 times

IMG_7218.JPG (445.6 KiB) Viewed 7275 times

IMG_7215.JPG (353.69 KiB) Viewed 7275 times

[Icky]

Nice. Another H4 and IDE working

[Robson]

Forgot to add a socket for this upgrade.

BA12F2D5-4C4E-4555-8E0D-7B4D405ED8EB.jpg (196.1 KiB) Viewed 7228 times

[derkom]

Forgot to add a socket for this upgrade

No need. You were born with one.

[Robson]

A growing collection.

IMG_7252.JPG (193.19 KiB) Viewed 7221 times

[Robson]

Board nr2 that I bought from @Velociraptor.
I was going for it, this is all built today. Only few things left but run out of sockets so will fully complete the board when they're here.

104879810_10160380223137715_3172571423607197759_n.jpg (405.46 KiB) Viewed 7171 times

[exxos]

Pretty impresses amount of stuff added in just a day!

[Robson]

After a little bit of sizzling that's cured with IPA bath + drying Board Nr2 is alive.

IMG_7331.JPG (285.8 KiB) Viewed 7112 times