REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
terriblefire wrote: 17 May 2020 23:28
@Icky are you able to do large prints in like that in one hit? I'd be interested in an early version for my H4 if you are up for producing a small run?
Tried doing the first run of a case bottom today but ran into several printer issues. Hotend and extruder issues.
When I get this rolling I will do a small run but you will have to be behind @exxos and his pink case :)
terriblefire wrote: 17 May 2020 23:28
@Icky are you able to do large prints in like that in one hit? I'd be interested in an early version for my H4 if you are up for producing a small run?
Tried doing the first run of a case bottom today but ran into several printer issues. Hotend and extruder issues.
When I get this rolling I will do a small run but you will have to be behind @exxos and his pink case :)
I'm in no rush. If there is a choice of colour that dark grey the falcon is would be my preference. Otherwise anything except the pink :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
I have been battling with my printer for the last couple of weeks as @exxos can attest, listening to my rants on finding root causes.
Any how this is the first full print starting to emerge on the Giant Panda of the case bottom part. its early days and I don't want to jinx it but its managed to get past the first couple of layers.
IMG_5305.jpeg
You do not have the required permissions to view the files attached to this post.
I really love this.. Other than ask my favourite deity to smile on your project is there anything i can do to help?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire wrote: 26 May 2020 23:14
I really love this.. Other than ask my favourite deity to smile on your project is there anything i can do to help?
Thanks @terriblefire.
It's been a blast building this monster even with its annoying foibles.
At the moment the only thing I need is time which we don't get enough of and lots of crossed fingers this run works :)
Icky wrote: 26 May 2020 23:45
At the moment the only thing I need is time which we don't get enough of and lots of crossed fingers this run works :)
Know the feeling.
Make me a Falcon coloured case and i'll add DSP to the H5 :P
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Icky wrote: 26 May 2020 23:01
I have been battling with my printer for the last couple of weeks as @exxos can attest, listening to my rants on finding root causes.
We had a failure. There were not enough crossed fingers.
Turns out someone went into the office and then left the door open with a draft that made the print warp at the edge resulting in a failure of the head hitting the edge in turn skewing the layers. Been working on the front enclosure door and chamber controller.
