Looks correct, rotate the cap 90deg
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TerribleFire's H4 Build
Re: TerribleFire's H4 Build
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Ah yes.. that totally threw me.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
All passives on..
- 088C0BDC-ECCC-427E-90ED-DAE25239E3A8.jpeg (459.41 KiB) Viewed 4031 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Can i check that the rounded corner is pin one on the MMU & GLUE?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
Looks like it...terriblefire wrote: Sun May 17, 2020 8:38 pm Can i check that the rounded corner is pin one on the MMU & GLUE?
- IMG_5175.JPG (351.42 KiB) Viewed 4007 times
- IMG_5177.JPG (331.35 KiB) Viewed 4007 times
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
Thanks all...
I'm within striking distance of a boot.
I'm within striking distance of a boot.
- IMG_2398.jpg (399.65 KiB) Viewed 3999 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
Looking good @terriblefire but a health warning for those with OCD, don't look at the bank of resistors next to the MMU.
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TerribleFire's H4 Build
PhilC wrote: Sun May 17, 2020 10:18 pm Looking good @terriblefire but a health warning for those with OCD, don't look at the bank of resistors next to the MMU.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TerribleFire's H4 Build
He did it deliberately to annoy peoplePhilC wrote: Sun May 17, 2020 10:18 pm Looking good @terriblefire but a health warning for those with OCD, don't look at the bank of resistors next to the MMU.
