exxos blog - random goings on

[exxos]

Ta'daaaa!

H4 with TOS206 :thumbup:

Whos dumbass idea was it to put the ROM jumper under the PSU! :roll:

IMG_5111.JPG

IMG_5112.JPG

[PhilC]

Your H4 needs a better name.

[exxos]

Working on the booster part now..

Was supposed to be this...

IMG_5114.JPG

but ended up like this...

IMG_5117.JPG

.. Basically because there was one bent pin, and by the time I got the CPU out of the socket.. Broke the socket.. Ended up with more bent pins... Ripped a couple of tracks up on the PCB... I ended up just stacking sockets and putting my ZIF adapter in as had enough of those DIP's!

So we ended up with this...

IMG_5118.JPG

And later on this...

IMG_5119.JPG

I don't know if this will work with ultrasatan... I really cannot be bothered at this point to start messing around with it all... I do not expect there to be any issues but you never know with all this stuff :roll:


Anyway, the blitter test has just finished..

IMG_5120.JPG

A accelerator like the terrible fire ones can be plugged into this board.. The board is just used as a TOS206 decoder. of course with correct firmware on the terrible fire boards, the effective ROM speed can be up to 32MHz.

[exxos]

So the booster is been a bit of a pain, I don't know why :roll: It is very hit and miss if turning on the computer boots up, I did think at first this could be a wake up state issue, but pressing reset several times generally lets it boot up..

And not really sure why this is happening yet. It is possible it is because I had to scrimp on IO pins on the PLD as I didn't have enough pins for a RESET signal to it :( But even so I don't really know why this would be a problem anyway.

[exxos]

Nothing seems to be wrong with anything. Through the CPU clock is pretty bad which I think isn't helping. So buffer and other bits added in... will "retire" the current boards to TOS206 only boards while the waiting on the new boards....

[exxos]

Started to test out some 68B50's for my store.. Socket broke after just 4 chip changes :roll:

Have to go hunting to see if I can find some turnpin sockets now...

IMG_5129.JPG

[exxos]

:cry: :cry: :cry:

Where's Atari.. I need to sue um!

IMG_5137.JPG

[JezC]

Are you trying to steal a job from @rubber_jonnie ? :D

[rubber_jonnie]

Oooo, owie,

[JezC]

Yes, nasty!
:awwww: