@exxos @Icky Good morning all. I'm after a bit of your sagely advice please.
I'm about to program a GAL for a different IDE adapter for the Mega bus, and rather than having a JED file, I have two blocks of text, one a GAL file and one that Ibelieve is a JED listing. I've attached both.
Is it simply a matter of removing the .txt extension from the JED file and using that, or would it make more sense to assemble the GAL file and use the resulting JED?
I'd be appreciative of your advice as this is getting a bit towards the edge of my GAL experience and I'd like to expand my knowledge a bit. I read that WinCupl can assemble GAL giles, but still trying to work out how to drive it.
Thanks in advance.
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
GAL programming - verifying what you're about to program
-
rubber_jonnie
- Site Admin

- Posts: 15028
- Joined: 17 Aug 2017 19:40
- Location: Essex
GAL programming - verifying what you're about to program
You do not have the required permissions to view the files attached to this post.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
exxos
- Site Admin

- Posts: 28619
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: GAL programming - verifying what you're about to program
I would rename the JED.TXT to .JED and just see if your programmer accepts it.
I translated the code into a 22V10 for WinCUPL and put the LS03 in the GAL as well, but I never got it to work. The only reason that TTL chip is there is because the 16V8 doesn't have "open collector" outputs.. the 22V10 does. Amazing really after all this time nobody has updated the circuit in the same way.
I translated the code into a 22V10 for WinCUPL and put the LS03 in the GAL as well, but I never got it to work. The only reason that TTL chip is there is because the 16V8 doesn't have "open collector" outputs.. the 22V10 does. Amazing really after all this time nobody has updated the circuit in the same way.
-
rubber_jonnie
- Site Admin

- Posts: 15028
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: GAL programming - verifying what you're about to program
@exxos Awesome, thanks very much, I'll give that a go. It is much as I thought it would be, but I had a wobble, hence the ask, thanks for the quick reply.exxos wrote: 28 Mar 2020 11:45 I would rename the JED.TXT to .JED and just see if your programmer accepts it.
I translated the code into a 22V10 for WinCUPL and put the LS03 in the GAL as well, but I never got it to work. The only reason that TTL chip is there is because the 16V8 doesn't have "open collector" outputs.. the 22V10 does. Amazing really after all this time nobody has updated the circuit in the same way.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
rubber_jonnie
- Site Admin

- Posts: 15028
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: GAL programming - verifying what you're about to program
@exxos Seems to have programmed OK, will see what happens later!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
exxos
- Site Admin

- Posts: 28619
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: GAL programming - verifying what you're about to program
:fire: :fire: :fire: :fire:rubber_jonnie wrote: 28 Mar 2020 12:17 @exxos Seems to have programmed OK, will see what happens later!
-
rubber_jonnie
- Site Admin

- Posts: 15028
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: GAL programming - verifying what you're about to program
@exxos I'm thinking more like :girldance: :girldance: :girldance:exxos wrote: 28 Mar 2020 12:45:fire: :fire: :fire: :fire:rubber_jonnie wrote: 28 Mar 2020 12:17 @exxos Seems to have programmed OK, will see what happens later!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
rubber_jonnie
- Site Admin

- Posts: 15028
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: GAL programming - verifying what you're about to program
Yep, all good :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Who is online
Users browsing this forum: ClaudeBot and 5 guests