Huge Thanks to @supaduper for donating these 2600 goodies to exxos's emporium of weirdness :lol: Now looks like my game collection has more than tripled :D :lol:
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
exxos blog - random goings on
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Mouser stuff arrived :) Thats £500+ worth of stuff in that half empty box :roll:
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
I think I now have the worlds supply of DB19F connectors :lol: :twisted: :twisted:
And yes, there are several layers of these in that box. They are PCB mount right angled to fit motherboards etc :)
I now need to go have a couple shots of vodka before I look at the bill for all this :shock:
And yes, there are several layers of these in that box. They are PCB mount right angled to fit motherboards etc :)
I now need to go have a couple shots of vodka before I look at the bill for all this :shock:
You do not have the required permissions to view the files attached to this post.
-
dhedberg
- Posts: 109
- Joined: 12 Sep 2017 20:21
Re: exxos blog - random goings on
Holy moly! How many did you buy? 1000? From where?exxos wrote: 24 Jan 2020 13:49 I think I now have the worlds supply of DB19F connectors :lol: :twisted: :twisted:
Daniel, New Beat - http://newbeat.atari.org.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
-
TimNaber
- Posts: 67
- Joined: 01 Nov 2019 15:20
Re: exxos blog - random goings on
Based on the silver part, there is 99 showing right there.
ST: TT030 10/32m; Falcon 030 14m(2); MSTe 4m; MST 4m(3); MST 4m AdSpeed; 1040STf 4m(4); ST 4m(2); MF 44 w/SCSI2SD(3); MF 30(3); MF30 w/Drem
8-Bit: 320XE w/Ultraspeed+/FIXXL; 320XE; 130XE w/Ultimate 1m; 600XL w/Ultimate 1m; 800XL w/Omnimon XL/Boss XL/Omniview XL; 800 w/Incognito; 800 48K; Black Box Enhanced(3); 1050 Super Archiver II; 1050 Happy(2); XF551 360K(2); XF551 720K; HD Tower 480m
8-Bit: 320XE w/Ultraspeed+/FIXXL; 320XE; 130XE w/Ultimate 1m; 600XL w/Ultimate 1m; 800XL w/Omnimon XL/Boss XL/Omniview XL; 800 w/Incognito; 800 48K; Black Box Enhanced(3); 1050 Super Archiver II; 1050 Happy(2); XF551 360K(2); XF551 720K; HD Tower 480m
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
I've got 800, and that's all the stock they had.. but this cost well into 4 figures to buy, so sure wasn't cheap.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Going wayyyyyyyy back to the TOS206 boards... Getting SMT 22V10 is near impossible, other than the Atmel ones which are a bit of a pain to program because of a power down on pin 4 (which programers seem to enable by default and hard to turn to off). So I have started a new board based on the ATF1502 SMT instead.
EDIT:
This one will use a 2 68K DIP's so instead of soldering over the CPU, this will be more pluggable and easier to solder I think. I guess it could still be soldered ontop of the CPU anyway.
EDIT:
This one will use a 2 68K DIP's so instead of soldering over the CPU, this will be more pluggable and easier to solder I think. I guess it could still be soldered ontop of the CPU anyway.
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Bit more progress..
I think overall this is basically done...
I think overall this is basically done...
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
Finished off the PCB and sent off for 3 from OSH in the USA ;) I also dug out my dev-board to develop the firmware which will run on the new PCB.
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin
- Posts: 28560
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: exxos blog - random goings on
@Icky Sent me the MMU board as mentioned over in this topic which I will post in when there is some actual progress.
I nominated a new STFM board for this project, basically one with nothing else socketed as I am getting tired of dodgy connections on sockets, so this board will only have the MMU "socketed" With the FPGA board.
Also using my new desoldering toy, this may very light work of a otherwise annoying task :thumbup: The holes are extremely clean, and the socket literally fell out of the motherboard when it was done!
EDIT:
I nominated a new STFM board for this project, basically one with nothing else socketed as I am getting tired of dodgy connections on sockets, so this board will only have the MMU "socketed" With the FPGA board.
Also using my new desoldering toy, this may very light work of a otherwise annoying task :thumbup: The holes are extremely clean, and the socket literally fell out of the motherboard when it was done!
EDIT:
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: Amazon [bot], apple [bot], ClaudeBot, don_apple, semrush [bot] and 14 guests