REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF Riser Revision 0 Arrives
Moderators: terriblefire, Terriblefire Moderator
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1371
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: TF Riser Revision 0 Arrives
May I ask who is doing the talking? Arm?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
The ARM CPU has a UART wire up to the CD32 UART.. ;)
so they can keep each other company, :)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor
- Posts: 664
- Joined: 08 Nov 2018 12:05
Re: TF Riser Revision 0 Arrives
You are on a roll Steve, great work
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
TBH im just testing the CPLD fimrware can do what it needs to do .. happy for someone else to do the ARM programming.. should be a case of porting the MiST code to STM32F105
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF Riser Revision 0 Arrives
Oops! apologies for the misinformation.terriblefire wrote: 19 Jan 2020 14:13 The CUCD's do have serial device but dont seem to have Term on them. Hmmm.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
it was good enough to get me working...go0se wrote: 19 Jan 2020 19:08Oops! apologies for the misinformation.terriblefire wrote: 19 Jan 2020 14:13 The CUCD's do have serial device but dont seem to have Term on them. Hmmm.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
Been arsing about...
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
So for those not following..
I created a CubeIDE project, used an ST Link with serial wire debug and can step debug the ARM.
I then configured debugging and printf to output on UART5 so the Amiga can see it.
I then got basic USB host HID recognising some devices. I can see keystrokes but mouse stuff is crashing for some reason.
I noticed that some devices don’t work at all. Possibly missing some power negotiation.
I created a CubeIDE project, used an ST Link with serial wire debug and can step debug the ARM.
I then configured debugging and printf to output on UART5 so the Amiga can see it.
I then got basic USB host HID recognising some devices. I can see keystrokes but mouse stuff is crashing for some reason.
I noticed that some devices don’t work at all. Possibly missing some power negotiation.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1371
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: TF Riser Revision 0 Arrives
That is impresive in so short period of time!terriblefire wrote: 20 Jan 2020 07:49 So for those not following..
I created a CubeIDE project, used an ST Link with serial wire debug and can step debug the ARM.
I then configured debugging and printf to output on UART5 so the Amiga can see it.
I then got basic USB host HID recognising some devices. I can see keystrokes but mouse stuff is crashing for some reason.
I noticed that some devices don’t work at all. Possibly missing some power negotiation.
What is the goal? Keyboard, Mouse and some most common controller support?
I woudn't be suprised if some devices will never work. It is the case for gotek and some usb sticks.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF Riser Revision 0 Arrives
Goal for me right now is just to get the CPLD firmware working. I’m expecting a rewrite of the ARM firmware from people at some point
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: ClaudeBot and 1 guest