Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Limited TF536 Run - Sort of Sales (All gone)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by 8 Bit Dreams »

Im curious about cpld,
Is 95288XL needed to fit 128MB firmware or will it fit on 95144XL chip?
Retro computer hardware & repair in Germany
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by terriblefire »

mprato wrote: Fri Jan 03, 2020 4:33 pm I'd like one board too..
I've got to learn verilog to add another 2MB on tf530 but now it's time for more memory... :D

thanks as always!
Sorry all gone for this experiment.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by terriblefire »

8 Bit Dreams wrote: Fri Jan 03, 2020 10:02 pm Im curious about cpld,
Is 95288XL needed to fit 128MB firmware or will it fit on 95144XL chip?
I’ll have to check but I thought the 536 was 288 anyways?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1371
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by arkadiusz.makarenko »

terriblefire wrote: Thu Jan 02, 2020 11:22 pm
8 Bit Dreams wrote: Thu Jan 02, 2020 10:43 pm Will upload BOM file i used for my build @ weekend
I'll also give out a new firmware that can do 128Mb if anyone is crazy enough to want that on a A500.
<Strong Eastern European Accent> Hold my beer</Strong Eastern European Accent>
:D
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
mprato
Posts: 8
Joined: Fri May 24, 2019 7:09 pm

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by mprato »

I'll wait for the next run :(
terriblefire wrote: Fri Jan 03, 2020 10:40 pm Sorry all gone for this experiment.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by 8 Bit Dreams »

Almost sure we'll get positive feedbacks from testers and pcbs will be offered soon
Retro computer hardware & repair in Germany
alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: Thu Nov 08, 2018 12:59 pm

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by alenppc »

8 Bit Dreams wrote: Sat Jan 04, 2020 10:49 am Almost sure we'll get positive feedbacks from testers and pcbs will be offered soon
I am almost sure of the opposite. But I hope you’re right and I am wrong :)
User avatar
kludge
Posts: 400
Joined: Thu Nov 08, 2018 2:05 pm
Location: Sweden

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by kludge »

8 Bit Dreams wrote: Sat Jan 04, 2020 10:49 am Almost sure we'll get positive feedbacks from testers and pcbs will be offered soon
alenppc wrote: Sat Jan 04, 2020 12:37 pm I am almost sure of the opposite. But I hope you’re right and I am wrong :)
I am almost sure that one of you nailed it.
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.

My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by terriblefire »

Boards have shipped (from china)
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Fonzie
Posts: 17
Joined: Sun Jan 05, 2020 12:32 pm

Re: Limited TF536 Run - Sort of Sales (All gone)

Post by Fonzie »

I am excited by this and will be following with great interest, good luck with the builds and I may make one for myself if successful :D
Post Reply

Return to “TF536”