Falcon repair - Phantom SE - need input.

[Bikerbob]

Hey all, I have already had this going on Atari-forum.. so I dont want to duplicate everything.

I am trying to fix my buddy's Falcon - it had a Phantom SE Accelerator installed - I think I might have a bad crystal?

http://atari-forum.com/viewtopic.php?f= ... 25#p389930

Thats the topic.. if you are into Falcons, and feel you might have input. I could really use it.

Thanks

James

[Bikerbob]

Really could use some help.

Would appreciate any input.

James

[exxos]

I think as other have said in that thread, best to remove it and get a stock machine working first.

[Bikerbob]

So I will need to source the SMD resistors removed and L102.

Repair the cut traces.. and a couple of the chips.. I am not sure pins are going back in.. so might have to replace the chips.

I guess I will start sourcing..

James

[Bikerbob]

Anyone tell me the values of what I have lost?

I dont see a value for L102 on the schematic? R234 etc?

James

[exxos]

If your talking about the clock resistors which are normally removed, those are probably 33R. Inductors, no idea, Probably salvage them from a STFM, or just wire link over them for testing as they probably don't really do much.

[Bikerbob]

ok .. I just want to get this thing going! :)

Thanks

James