Building a DIY large bed 3D printer

[Icky]

This is for sure the only 3D printer specifically designed and constructed to print out ST cases :-D

Great work, I am really looking forward to see the finished thing :)

Thanks. It's going to take time as I mentioned I have messed up my current printer putting in a new board and need to print a few more pieces out. Also its a bit of a modify on the go build as the dimensions are outside of a supported build for the Voron its based on.

I too can't wait to see it do its first ST case print.

[Icky]

Looking good so far Icky, will be looking forward to seeing it working in person at some point.

:)

[Icky]

Moved onto the bottom of the printer and started to place some of the boards in. I have the Z drive steppers out as I am having some new parts kindly printed by PhilC whilst my current printer is still trying to recover from a new mainboard replacement. I know, I shouldn't have too many projects on the go at once. :)

With this size printer there is plenty of space for the Duet 2 and Duex 5 and will need to start putting in the PSU's, Raspberry Pi etc etc.

IMG_4473.jpeg

[PhilC]

I better hurry up and print the last two lots then.

[Icky]

XY gantry belts now all in place with the toolhead block showing the Z-probe. Next task to start wiring and testing things are working as expected.

IMG_4477.jpeg

[stephen_usher]

I'll be impressed if it can produce ceramic mugs. :-)

[Icky]

I'll be impressed if it can produce ceramic mugs. :-)

I would be too :) That would be a very interesting market.

[Icky]

Most important thing for the printer is making sure you have the right boot logo on your screen :)

IMG_4482.jpeg

Printed parts arrived from PhilC this morning (much appreciated PhilC), now need to clean them up and get the Z drive area sorted.

[PhilC]

:yay2: :yay2: :yay2:

[Atarian Computing]

Good choice with the Duet and Duex. I hear they are worth the higher price.