One last BOM thought:
Aren't you worried that the generic SPI notation will lead to problems with compatibility?:
"U1" "3.3V SPI Flash" "SPI_FLASH-X25XXSMD" "SO08" "32M Serial Flash Memory"
I've seen some issue's with different reading mode, writing schemes and speeds, like in the ESP32 forums:
https://www.esp32.com/viewtopic.php?t=386
Just a thought..
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Latest TF534 is here
Moderators: terriblefire, Terriblefire Moderator
-
joethezombie
- Posts: 2
- Joined: Wed Jan 02, 2019 5:31 pm
Re: Latest TF534 is here
Fantastic! I've been waiting in the shadows for availability! Awesome work.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
I’ll reply to everyone on Tuesday. I’m AFK for the weekend
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Latest TF534 is here
You assumed here I’d noticed. The SPI rom is not yet operational. It’s on a long todo list.Maximilian wrote: Fri Mar 01, 2019 12:36 am One last BOM thought:
Aren't you worried that the generic SPI notation will lead to problems with compatibility?:
"U1" "3.3V SPI Flash" "SPI_FLASH-X25XXSMD" "SO08" "32M Serial Flash Memory"
I've seen some issue's with different reading mode, writing schemes and speeds, like in the ESP32 forums:
https://www.esp32.com/viewtopic.php?t=386
Just a thought..
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
redhawk668
- Posts: 91
- Joined: Sat Jan 06, 2018 3:03 pm
- Location: Netherlands
Re: Latest TF534 is here
I’m interested in 2 PCB’s,
My collection: 1040 STE, TOS 2.06, 4 mb, CosmosEx - 520 STFM, TOS 1.04, 4 mb, Blitter, CosmosEx - 520 STFM, TOS 1.04, 4 mb - 1040 STF, TOS 1.04, 1 mb, Gotek - Amiga 1200 with Blizzard 1220/4 - Amiga 500 + ACA500 - Amiga 500 + TF530, 1 mb chipram hack.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Re: Latest TF534 is here
I’m interested in 2 PCB’s aswell.
-
Maximilian
- Posts: 407
- Joined: Thu Feb 28, 2019 5:02 pm
Re: Latest TF534 is here
So the advice is to skip the buying/mounting of a SPI rom at this time?terriblefire wrote: Fri Mar 01, 2019 8:41 am You assumed here I’d noticed. The SPI rom is not yet operational. It’s on a long todo list.
Re: Latest TF534 is here
Hi TF,
Is there a way to contact you for ordering the 534 PCBs ?as the PM seems still not operational for me
Is there a way to contact you for ordering the 534 PCBs ?as the PM seems still not operational for me
-
joethezombie
- Posts: 2
- Joined: Wed Jan 02, 2019 5:31 pm
Re: Latest TF534 is here
Yeah, I can't PM either, probably due to low post count. But yeah, I would also like to purchase a 534.
Re: Latest TF534 is here
I've allowed you guys to use them pm system now..