https://www.thingiverse.com/thing:7310028
pcmcia_v2.stl- (8.48 KiB) Downloaded 20 times
- IMG_4442.jpg (252.97 KiB) Viewed 1731 times
- IMG_4441.jpg (243.51 KiB) Viewed 1731 times
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
PCMCIA 3D Print Holder
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
PCMCIA 3D Print Holder
So i am still working more or less continuously on the 4060 but it occasionally gets me down because its so difficult to make actual progress with it (anything that works for me doesnt work for anyone else it seems). But as a little distraction i've a PCMCIA project going on. I found i needed a shroud to hold the pcb prototype. I couldnt find one so i create it.
https://www.thingiverse.com/thing:7310028
So if anyone needs it for their projects its completely open.
https://www.thingiverse.com/thing:7310028
So if anyone needs it for their projects its completely open.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."