Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

dml attempts a Raven

User avatar
dml
Posts: 855
Joined: Wed Nov 15, 2017 10:11 pm

Re: dml attempts a Raven

Post by dml »

PhilC wrote: Wed Aug 06, 2025 6:19 pm I fired up the Raven to see if I could emulate your issues and well, now it's broke :roll:
Gets as far as intmfp and nothing else, #annoying
:roll:

Sorry if I transferred my chaos to you!
User avatar
dml
Posts: 855
Joined: Wed Nov 15, 2017 10:11 pm

Re: dml attempts a Raven

Post by dml »

...I might finally be onto something here... but I'm also cooking now and kitchen is never a good mix with computers. I'll update shortly....

o_O
User avatar
PhilC
Moderator
Moderator
Posts: 7524
Joined: Fri Mar 23, 2018 8:22 pm

Re: dml attempts a Raven

Post by PhilC »

dml wrote: Wed Aug 06, 2025 6:22 pm
PhilC wrote: Wed Aug 06, 2025 6:19 pm I fired up the Raven to see if I could emulate your issues and well, now it's broke :roll:
Gets as far as intmfp and nothing else, #annoying
:roll:

Sorry if I transferred my chaos to you!
It's not your fault but I'm blaming you anyway :lol:
If it ain't broke, test it to Destruction.
User avatar
agranlund
Site sponsor
Site sponsor
Posts: 1767
Joined: Sun Aug 18, 2019 10:43 pm
Location: Sweden
Contact:

Re: dml attempts a Raven

Post by agranlund »

dml wrote: Wed Aug 06, 2025 6:25 pm ...I might finally be onto something here... but I'm also cooking now and kitchen is never a good mix with computers. I'll update shortly....

o_O
Last time I got stuck in front of the computer while cooking the fire alarm went off, alarm company rang, and I had to explain that no I'm not going to be needing a fire truck today :)
User avatar
agranlund
Site sponsor
Site sponsor
Posts: 1767
Joined: Sun Aug 18, 2019 10:43 pm
Location: Sweden
Contact:

Re: dml attempts a Raven

Post by agranlund »

PhilC wrote: Wed Aug 06, 2025 6:19 pm I fired up the Raven to see if I could emulate your issues and well, now it's broke :roll:

Gets as far as intmfp and nothing else, #annoying
To be fair, your signature does say "If it ain't broke, test it to Destruction." so it's perfectly in character :)
User avatar
dml
Posts: 855
Joined: Wed Nov 15, 2017 10:11 pm

Re: dml attempts a Raven

Post by dml »

agranlund wrote: Wed Aug 06, 2025 6:45 pm Last time I got stuck in front of the computer while cooking the fire alarm went off, alarm company rang, and I had to explain that no I'm not going to be needing a fire truck today :)
:D

I haven't quite managed that but got close a few times. Definitely more than a few 'charcoal offerings' have appeared.



So here is what I found!

I stopped juggling the two short cards (ET4000AX <-> ATI Mach32) and dug out the Diamond Hercules W32i. Shoved that in... and...

It's not crashing anymore. I did all the same stuff - same tests - and so far it is still running without a single LineF panic.

So I upped the stakes by swapping to the 48MHz clock - and it worked too. And it is still working....

o_O

Huh.


Of course, I'll try again after writing this and it will crash instantly! but it is certainly not behaving as badly as before. Much more stable.
User avatar
dml
Posts: 855
Joined: Wed Nov 15, 2017 10:11 pm

Re: dml attempts a Raven

Post by dml »

....and after all that - and what looked like a success - fortune decides otherwise!

I think this Hercules is on its last legs. :p

oops2.jpg
oops2.jpg (837.92 KiB) Viewed 1372 times
oops1.jpg
oops1.jpg (136.45 KiB) Viewed 1372 times

You can has crashes or you can has many dots! Ok thanks between the two, I'll go for the dots...



These are the problem candidates. The bottom two provide the LineF option. The top one, many dots. Especially if you put your hand near the ram chips.

cards.jpg
cards.jpg (840.34 KiB) Viewed 1372 times
User avatar
PhilC
Moderator
Moderator
Posts: 7524
Joined: Fri Mar 23, 2018 8:22 pm

Re: dml attempts a Raven

Post by PhilC »

agranlund wrote: Wed Aug 06, 2025 6:48 pm
PhilC wrote: Wed Aug 06, 2025 6:19 pm I fired up the Raven to see if I could emulate your issues and well, now it's broke :roll:

Gets as far as intmfp and nothing else, #annoying
To be fair, your signature does say "If it ain't broke, test it to Destruction." so it's perfectly in character :)
Ok, Maybe I'll blame the MFP oscillator that failed instead.
If it ain't broke, test it to Destruction.
User avatar
agranlund
Site sponsor
Site sponsor
Posts: 1767
Joined: Sun Aug 18, 2019 10:43 pm
Location: Sweden
Contact:

Re: dml attempts a Raven

Post by agranlund »

dml wrote: Wed Aug 06, 2025 7:14 pm
You can has crashes or you can has many dots! Ok thanks between the two, I'll go for the dots...
User avatar
dml
Posts: 855
Joined: Wed Nov 15, 2017 10:11 pm

Re: dml attempts a Raven

Post by dml »

agranlund there is no laughing-with-tears emote!!! :D
Post Reply

Return to “RAVEN 060 - USER BUILDS”