Fixing my Milan 040 (or not) blog

[PhilC]

@exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards

[exxos]

@exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards

Its a super IO, but not sure it deals with the PCI bus.

Looks like keyboard, printer, serial, floppy, its on the ISA bus, so probably just a "built on" IO card I guess.

I just tried the S3 but no output. Would have thought the card would have given sync at least. But probably can't do much else until my new chips come :(

[PhilC]

@exxos it's probably failing to get as far as the bus initialisation because of the missing chips.

[exxos]

:girldance: :cheer: :girldance: :cheer:

11111.jpg

IMG_3450.JPG

[PhilC]

:cheer: :cheer: :cheer:

[SteveBagley]

Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

Steve

[exxos]

Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

cool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.php

Looks like there's updated TOS as well...

[Badwolf]

Very nice!

That screwdriver must have landed on the EEPROM in just the right way to reprogram it with the bootblock at the top and no OS!

BW

[agranlund]

Nice!! Great work!

[exxos]

Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

cool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.php

Looks like there's updated TOS as well...

I get a single beep but no boot up. So not sure whats going on there. Will go back to the previous flash and try again...