Does @rubber_jonnie have a Z88?
I'm pretty sure he has the NC100 & NC200...
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
New arrival :)
-
rubber_jonnie
- Site Admin

- Posts: 15020
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: New arrival :)
I don't have a Z88 (I nearly did but that's another story) but I do have an Epson HX-20.JezC wrote: 27 Mar 2025 10:39 Does @rubber_jonnie have a Z88?
I'm pretty sure he has the NC100 & NC200...
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
mgi
- Posts: 136
- Joined: 06 Jun 2021 16:37
Re: New arrival :)
Those Epson early laptops are fantastic
-
HigashiJun
- Posts: 2388
- Joined: 19 Jun 2020 07:21
- Location: Tokyo
Re: New arrival :)
@rubber_jonnie
BTW, how is your repair going ?
BTW, how is your repair going ?
-
rubber_jonnie
- Site Admin

- Posts: 15020
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: New arrival :)
It's not. I thought I had bad RAM and replaced one, but didn't help. I'm going to get back to it soon and need to break out the scope, but I do wonder if it's a power issue.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
HigashiJun
- Posts: 2388
- Joined: 19 Jun 2020 07:21
- Location: Tokyo
Re: New arrival :)
So it's more complex than expected...rubber_jonnie wrote: 27 Mar 2025 12:08 It's not. I thought I had bad RAM and replaced one, but didn't help. I'm going to get back to it soon and need to break out the scope, but I do wonder if it's a power issue.
-
rubber_jonnie
- Site Admin

- Posts: 15020
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: New arrival :)
Very much so. It's actually a dual CPU machine and runs off battery, with power only for charging the battery. Basically if you remove the battery you can't run it off the charger.HigashiJun wrote: 27 Mar 2025 12:20So it's more complex than expected...rubber_jonnie wrote: 27 Mar 2025 12:08 It's not. I thought I had bad RAM and replaced one, but didn't help. I'm going to get back to it soon and need to break out the scope, but I do wonder if it's a power issue.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
HigashiJun
- Posts: 2388
- Joined: 19 Jun 2020 07:21
- Location: Tokyo
Re: New arrival :)
Yeah, that's what I read when I was looking for some information about this machine.rubber_jonnie wrote: 27 Mar 2025 12:31 Very much so. It's actually a dual CPU machine and runs off battery, with power only for charging the battery. Basically if you remove the battery you can't run it off the charger.
-
rubber_jonnie
- Site Admin

- Posts: 15020
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: New arrival :)
Whats annoying is it worked fine, then one day just stopped :(HigashiJun wrote: 27 Mar 2025 22:29Yeah, that's what I read when I was looking for some information about this machine.rubber_jonnie wrote: 27 Mar 2025 12:31 Very much so. It's actually a dual CPU machine and runs off battery, with power only for charging the battery. Basically if you remove the battery you can't run it off the charger.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
HigashiJun
- Posts: 2388
- Joined: 19 Jun 2020 07:21
- Location: Tokyo
Re: New arrival :)
Yeah, the kind of thing I hate...rubber_jonnie wrote: 27 Mar 2025 23:52 Whats annoying is it worked fine, then one day just stopped :(
Who is online
Users browsing this forum: ClaudeBot, semrush [bot] and 3 guests