My only suggestion is to try the other 2 firmware as they run the CPU at 8mhz and see if IDE behaves then..coonsgm wrote: 15 Mar 2025 15:10 Yeah, this is the same CF card I've been using with the STE536 for the last 6 months or so running the modded 206 for that time. It isn't byteswapped.
ST536 STE EDITION
-
exxos
- Site Admin
- Posts: 28376
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST536 STE EDITION
-
coonsgm
- Posts: 451
- Joined: 30 Jan 2021 01:30
Re: ST536 STE EDITION
Trying a different CF card now...if that doesn't work I'll try the other firmware
-
exxos
- Site Admin
- Posts: 28376
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST536 STE EDITION
Might also be an idea to show how you fitted the patch board.. it's odd as @Steve and @Badwolf seem to be stable now but not you :shrug: by the sounds of it, the changes didn't help at all ? So can only assume you have a different issue :shrug:coonsgm wrote: 15 Mar 2025 15:18 Trying a different CF card now...if that doesn't work I'll try the other firmware
-
Steve
- Posts: 3308
- Joined: 15 Sep 2017 11:49
Re: ST536 STE EDITION
So BW is stable now? What did he do?
-
exxos
- Site Admin
- Posts: 28376
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST536 STE EDITION
Same as you..
-
coonsgm
- Posts: 451
- Joined: 30 Jan 2021 01:30
Re: ST536 STE EDITION
Here's a photo of the patch board.exxos wrote: 15 Mar 2025 16:27Might also be an idea to show how you fitted the patch board.. it's odd as @Steve and @Badwolf seem to be stable now but not you :shrug: by the sounds of it, the changes didn't help at all ? So can only assume you have a different issue :shrug:coonsgm wrote: 15 Mar 2025 15:18 Trying a different CF card now...if that doesn't work I'll try the other firmware
You do not have the required permissions to view the files attached to this post.
-
Steve
- Posts: 3308
- Joined: 15 Sep 2017 11:49
-
exxos
- Site Admin
- Posts: 28376
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST536 STE EDITION
Seems fine...
-
exxos
- Site Admin
- Posts: 28376
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: ST536 STE EDITION
It was unstable, then he removed the cap and was fine...Steve wrote: 15 Mar 2025 17:08 Ah I suppose that means removing the cap and osc. Because last I knew he'd installed the board, but was unstable.
My concern is , why is the timing so sensitive to start with... If I go back to the original TF536 timings, TTram doesn't work at all... Even on the ST536..
My only idea at this point would be to move to a 288xl PLD as I can only think some timings off due to the compiler struggling to fit the code in a 144.
-
coonsgm
- Posts: 451
- Joined: 30 Jan 2021 01:30
Re: ST536 STE EDITION
@Steve Which cap did you remove? I assume the oscillator is the one closest to the patch board.
Who is online
Users browsing this forum: ClaudeBot and 6 guests