USB mouse issue

[alenppc]

Yeah, the TF riser is not ready to be sold.

[arkadiusz.makarenko]

I have spent substantial amount of time trying to tweek firmware to make it more reliable but I wasn't able to make it work on some machines.
This issue most likely would require new PCB or even different approach

[NeilDeWheel]

I bought it from a seller on Amibay, https://www.amibay.com/threads/amiga-cd ... st-2518496

[arkadiusz.makarenko]

I bought it from a seller on Amibay, https://www.amibay.com/threads/amiga-cd ... st-2518496

I would recommend you to contact the seller about the issue.

[Steve]

I don't know if it's related but on my 1200 the usb-mouse (tom/jerry) was always 'clicking' randomly, even after updating it's firmware (which was supposed to fix it) I did a lot of research online and found a fix, it was replacing the inductors on the mouse port with values from the a4000 motherboard. This fixed it on my a1200. Sorry if unrelated!

[arkadiusz.makarenko]

I don't know if it's related but on my 1200 the usb-mouse (tom/jerry) was always 'clicking' randomly, even after updating it's firmware (which was supposed to fix it) I did a lot of research online and found a fix, it was replacing the inductors on the mouse port with values from the a4000 motherboard. This fixed it on my a1200. Sorry if unrelated!

Unfortunately issue is between the riser and the chipset.