There is an RTC feature in the ARM so it could be done that way. But if thats the biggest bug anyone has i'll be happy.stephen_usher wrote: 16 Feb 2023 09:06I s'pose that a "starting date/time" plus then running the clock whilst the machine powered on if a good work-around. Maybe in future some sort of serial net device could be hacked on to do an NTP date, possibly using an add-on ROM image.terriblefire wrote: 15 Feb 2023 20:47 There is an RTC and battery backed up ram which we wont be bothering with in the MSX2 standard. The RTC is required but will be faked to a hard coded date unless someone is really in the mood to find a way to squeeze a battery on there.
Anyway, unless someone is going to use a disk drive and productivity software I'm not sure anyone will notice. :-)
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TFMSX Rev 2 Design Complete
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TFMSX Rev 2 Design Complete
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Ultimategilby
- Posts: 1
- Joined: 18 Dec 2023 19:27
Re: TFMSX Rev 2 Design Complete
How does one get a chance to make a purchase ?
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TFMSX Rev 2 Design Complete
Message @chucky. He will sort you out.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TFMSX Rev 2 Design Complete
Seems chucky is too busy to do the TFMSX anymore. Is anyone interested in picking up building it?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
exxos
- Site Admin
- Posts: 28563
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: TFMSX Rev 2 Design Complete
If nobody comes forward, then it's possible I could get some built. But would need a fab-ready BOM and PnP files to be able for me to just "dump" the project onto my fab-house to make them. I could likely flash firmware but that be about all I could do with it all. I know zero about the MSX stuff...terriblefire wrote: 01 Mar 2024 12:46 Seems chucky is too busy to do the TFMSX anymore. Is anyone interested in picking up building it?
-
Oliver_A
Re: TFMSX Rev 2 Design Complete
If you are interested in an YM2413 FPGA IP for this project, drop me a PM.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TFMSX Rev 2 Design Complete
TBH nobody seems interested in building them. The project doesnt have an FPGA eithers. Its all original chips and some glue :)Oliver_A wrote: 29 Jul 2024 23:05 If you are interested in an YM2413 FPGA IP for this project, drop me a PM.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Oliver_A
Re: TFMSX Rev 2 Design Complete
No problem, it seems that many MSX fan (including myself) chose to build the Omega MSX2 computer with case and keyboard.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TFMSX Rev 2 Design Complete
This design is meant for the casual gamer really. It's also an MSX2+ design. I can't remember if Omega was MSX2 yet?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7484
- Joined: 23 Mar 2018 20:22
Re: TFMSX Rev 2 Design Complete
It's been on my list to get myself one. I may be able to help build a few once my health improves a bit.terriblefire wrote: 29 Jul 2024 23:33TBH nobody seems interested in building them. The project doesnt have an FPGA eithers. Its all original chips and some glue :)Oliver_A wrote: 29 Jul 2024 23:05 If you are interested in an YM2413 FPGA IP for this project, drop me a PM.
If it ain't broke, test it to Destruction.
Who is online
Users browsing this forum: ClaudeBot and 3 guests