REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF360 with Kipper2k riser
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 with Kipper2k riser
@Amigaz If there is nothing further on this topic i'm inclined to delete it as it incorrectly gives the impression that the regulator should not be on botton of the TF360.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Amigaz
- Posts: 15
- Joined: 15 Mar 2024 06:47
- Location: Sweden
Re: TF360 with Kipper2k riser
Yes, you are correct.terriblefire wrote: 15 Mar 2024 12:42 The card doesn't need to be perfectly level. i've mine hanging at about 30 degrees and it's fine. i think you have a different issue
After some further testing we can cast aside my theory that it helps to move the TF360 slightly for it to boot.
A cold boot by toggling the power switch doesn't result in a boot but pressing the reset button when it doesn't cold boot it boots every time.
I am using a brand new PSU från Amigastore.eu and have also tested my old 4A PSU
-
Amigaz
- Posts: 15
- Joined: 15 Mar 2024 06:47
- Location: Sweden
Re: TF360 with Kipper2k riser
:dualthumbup:terriblefire wrote: 16 Mar 2024 18:47 @Amigaz If there is nothing further on this topic i'm inclined to delete it as it incorrectly gives the impression that the regulator should not be on botton of the TF360.
Who is online
Users browsing this forum: CCBot, OAI-Search [Bot] and 1 guest