- IMG_3285.JPG (116.26 KiB) Viewed 7130 times
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Future PSU designs
Re: Future PSU designs
Finally, a fully assembled "final" version
Re: Future PSU designs
That thing is pretty sexy!
What's all the extra holes for on the mains side?
What's all the extra holes for on the mains side?
Daniel, New Beat - http://newbeat.atari.org.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
Re: Future PSU designs
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2
Need testing : Falcon with CT2
Re: Future PSU designs
You mean the tin plated bit at the front etc ?
Re: Future PSU designs
Yeah. I think I was confused when looking it the pictures. Those are the 5V, 12V, and GND right?
Daniel, New Beat - http://newbeat.atari.org.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
Re: Future PSU designs
Leftmost 4 holes for 5V
Middle 6 holes for gnd.
Right 2 holes for 12V.
EDIT:
Oh think I see where confusion is now... that is not mains input on the front, I just used mains cable for the 5V and 12V wires
I needed something high current and that was all I had to hand.Re: Future PSU designs
I can answer the rest when I get time / the PSU but yes, it does get hot when pulling 12V a lot. I think the issue was actually something close to that - when I had the PSU "out in the open", it was fine but as soon as I put the case back on, let it work for 15 minutes - bzzzz. And that was it. Some diode died and the whole PSU was out of order. Maybe it's not a serious issue and can be fixed easily but still - yours doesn't do it.
Re: Future PSU designs
I guess I'm too late to the party but if there is still a hope -- any chance this setup could work with your new PSU:
Because that's exactly the reason why I had to order Centuriontech's PSU in the first place -- it has a bit more space on the right so I can use SD card adaptors like on the picture. In the old version, there is a couple of components in the way.
- IMG_20180926_115516.jpg (3.12 MiB) Viewed 7094 times
Re: Future PSU designs
Ouch indeed!mikro wrote: Fri Oct 05, 2018 7:10 am Some diode died and the whole PSU was out of order. Maybe it's not a serious issue and can be fixed easily but still - yours doesn't do it.
Never seen a IDE mash up like that. Its over hanging the PSU, so it's going to be in the way.mikro wrote: Fri Oct 05, 2018 7:14 am I guess I'm too late to the party but if there is still a hope -- any chance this setup could work with your new PSU:
Re: Future PSU designs
It's quite popular among Amiga people who for some reason prefer to have IDE female connectors angled to the left (contrary to the right what we would prefer). From your picture above it looked like the PCB is empty in that area except that black thing but maybe it's still too much.exxos wrote: Fri Oct 05, 2018 9:02 amNever seen a IDE mash up like that. Its over hanging the PSU, so it's going to be in the way.