STEVE’S MS-22 DUAL VCF MODULE

Post by **Icky** » 28 Dec 2022 15:27

I am building a kit for a friend who bought the SMT boards of the STEVE’S MS-22 DUAL VCF MODULE from Three Tom Modular and then realised SMT is not as easy as through hole soldering.

The MS-22 is a dual voltage controlled filter, inspired by the classic Korg MS-20 filter, with an innovative modulation matrix and one of the highest function-to-hp ratios in the land of Eurorack.

fullsizeoutput_30a8-1080x1080.jpeg

So time to start with Board A

IMG_2036.jpeg

Post by **Icky** » 28 Dec 2022 17:21

First board almost done.

IMG_2037.jpeg

IMG_2039.jpeg

IMG_2040.jpeg

Post by **mrbombermillzy** » 28 Dec 2022 20:31

Looks like a very nice piece of kit Icky. :)

Post by **Icky** » 14 Jan 2023 19:27

Finally received the last components for the 1st module which is now complete. Now for the next 3 modules.

IMG_2095.jpeg

Post by **Icky** » 26 Dec 2023 14:47

Finally got some time to do some SMD work on this, the third board. I have forgotten how time consuming and annoying SMD work is even with all the right equipment. It’s almost been a year since I touched it last.

IMG_3376.png

IMG_3377 (1).png

One more board to go but I dont think I can muster the enthusiasm to do it today.

Post by **rubber_jonnie** » 26 Dec 2023 15:25

Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board :)

Post by **Icky** » 27 Dec 2023 10:34

rubber_jonnie wrote: 26 Dec 2023 15:25 Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board :)

Thanks, I may give the final board a go today. Its going to be interesting as I will have to test the module works so will have to learn a bit of modular VCF

Post by **rubber_jonnie** » 27 Dec 2023 11:46

Icky wrote: 27 Dec 2023 10:34
rubber_jonnie wrote: 26 Dec 2023 15:25 Yeah, SMD stuff is a huge pain, even if you're able to do it and have good equipment. Looking good, fingers crossed you can muster a bit of enthusiasm for that last board :)
Thanks, I may give the final board a go today. Its going to be interesting as I will have to test the module works so will have to learn a bit of modular VCF

Good luck, I'm sure it'll work first time with your skills :)

Post by **Icky** » 02 Jan 2026 09:11

I finally finished the last board of this module yesterday that's 3 years since I started. Just goes to show how life and a bit of health issues get in the way. I just need to figure out how to power this up and test as it normally plugs into a backplane board and case.

IMG_1499.png

STEVE’S MS-22 DUAL VCF MODULE

STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Re: STEVE’S MS-22 DUAL VCF MODULE

Who is online