Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

FALCON30 expansion test fixture

General discussions or ideas about hardware.
Post Reply
sety
Posts: 224
Joined: Mon Aug 13, 2018 8:47 am

FALCON30 expansion test fixture

Post by sety »

Hi all.

The Falcon service manual makes mention of a FALCON30 expansion test fixture. It apparently has 16K RAM on it and you can load the diag roms onto it amongst other features. Has anyone ever seen one of these? I can't find any reference to it except for the service manual.

Thanks!
Stuart
User avatar
derkom
Moderator
Moderator
Posts: 1232
Joined: Sun Jul 29, 2018 6:45 pm

Re: FALCON30 expansion test fixture

Post by derkom »

sety wrote: Tue Apr 07, 2020 6:35 am The Falcon service manual makes mention of a FALCON30 expansion test fixture. It apparently has 16K RAM on it and you can load the diag roms onto it amongst other features. Has anyone ever seen one of these? I can't find any reference to it except for the service manual.
Best Electronics has these. Have a look at http://www.best-electronics-ca.com/falcon.htm and scroll down to the Diagnostics section near the end of the page. It's not required for testing unless you want to test all the external ports.

The RAM on the test fixture isn't for the diag ROM. I presume it's just used to buffer data when testing the bidrectional ports.
sety
Posts: 224
Joined: Mon Aug 13, 2018 8:47 am

Re: FALCON30 expansion test fixture

Post by sety »

Are you sure about this? I interpreted the manual to believe it plugs into the expansion header on a near dead Falcon and provides some basics to get a minimal boot and give some low level info to get out of the dark. If this is the one from BeST, then I will definitely buy one.
Screen Shot 2020-04-09 at 5.58.07 pm.png
Screen Shot 2020-04-09 at 5.58.07 pm.png (219.43 KiB) Viewed 4021 times
Screen Shot 2020-04-09 at 5.58.28 pm.png
Screen Shot 2020-04-09 at 5.58.28 pm.png (44.78 KiB) Viewed 4021 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28700
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: FALCON30 expansion test fixture

Post by exxos »

onboard blitter ? Has anyone seen a image of this kit ?
User avatar
derkom
Moderator
Moderator
Posts: 1232
Joined: Sun Jul 29, 2018 6:45 pm

Re: FALCON30 expansion test fixture

Post by derkom »

sety wrote: Thu Apr 09, 2020 11:11 am Are you sure about this? I interpreted the manual to believe it plugs into the expansion header on a near dead Falcon and provides some basics to get a minimal boot and give some low level info to get out of the dark. If this is the one from BeST, then I will definitely buy one.
Oh wow, that does indeed sound like a different device. My bad. Never heard of this one. Very interesting.
mikro
Posts: 826
Joined: Mon Aug 28, 2017 11:22 pm
Location: Kosice, Slovakia
Contact:

Re: FALCON30 expansion test fixture

Post by mikro »

Just an update on this. Asked Bradley about it:
When we got the rights to clear out the Sunnyvale Atari parts department, we cleared out every shelf of Atari parts they had. On top of that we also cleared out the Atari Techs area to. Never saw any other Falcon Test hardware in both areas. It most likely was one of the Falcon test hardware pieces Atari was going to make in the future, but never got around to it.
Post Reply

Return to “HARDWARE DISCUSSIONS”