JezC wrote: Sat Aug 22, 2026 11:24 am
Thanks...and what's at the other end inside the STE? I'm intrigued with what's providing the Ethernet functionality
Oh, you meant the source...l
It's an ENC28J60 module connected to the MonSTErbo.
JezC wrote: Sat Aug 22, 2026 12:33 pm
It'll be interesting to see how well it performs!
I don't expect terrific speeds...
Here's what Alan wrote:
For the ENC28J60 and UIP, I've submitted the code to sqward for inclusion in UIP tool and the source code is available. Also the ENC28J60 is actually a pretty slow chip, and I've had about 150Kbytes/s using curl to test throughput. NOTE: The ENC28J60 can't run at the fastest SPI speeds of the MonSTerbo.
HigashiJun wrote: Sun Nov 15, 2026 9:45 am
I was fiddling with my setup today and upgraded the ATW800/2 to its last Seurat Firmware (160 MHz) and to its last XVDI drivers.
I have also installed Freemint along Jinnee desktop and the result is quite nice:
1.JPG
I have no artefacts on the menu bar like I had on plain TOS and everything seems to run smoothly so far.
The Monsterbo still runs perfectly at 40Mhz on the 68EC020 CPU.
Might have to try this on my MSTE+ATW800/2. That desktop reminded me of RiscOS when I first saw the picture
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
rubber_jonnie wrote: Sun Nov 15, 2026 10:01 am
Might have to try this on my MSTE+ATW800/2. That desktop reminded me of RiscOS when I first saw the picture
rubber_jonnie wrote: Sun Nov 15, 2026 10:01 am
Might have to try this on my MSTE+ATW800/2. That desktop reminded me of RiscOS when I first saw the picture
Go for it !
The only thing is that I don't have a Monsterbo, just my MSTE at 16Mhz, and I know Freemint doesn't play well with just 4MB.
I can certainly try other desktops at higher resolutions though.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
rubber_jonnie wrote: Sun Nov 15, 2026 10:22 am
The only thing is that I don't have a Monsterbo, just my MSTE at 16Mhz, and I know Freemint doesn't play well with just 4MB.
HigashiJun wrote: Sun Nov 15, 2026 10:36 am
Not even a Monster ?
You would have enough RAM for Freemint.
No, not even a Monster.
4MB is enough to run Freemint, and I have in fact done so, however it's not really enough to do anything useful and I continually ran out if I tried to do anything useful with it.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...