New (and last ?) inbound

[HigashiJun]

Thanks !

:)

[HigashiJun]

Completely forgot the Tandy...


It works great now with this XT CF IDE model. The CF CARD is partitioned and all I have to is installing DOS and Windows 3.1

1.JPG

A peek from the rear of the machine:

2.JPG

I consider the project finished.

Guess that due to a lack of space, the 1000EX will soon have to find a new home.

:(

[rubber_jonnie]

Completely forgot the Tandy...


It works great now with this XT CF IDE model. The CF CARD is partitioned and all I have to is installing DOS and Windows 3.1


1.JPG


A peek from the rear of the machine:


2.JPG


I consider the project finished.

Guess that due to a lack of space, the 1000EX will soon have to find a new home.

:(

Nice work :)

Shame it'll have to go to a new home, but I understand. Whoever gets it will have a nice machine.

[HigashiJun]

@rubber_jonnie

Thank you !

[HigashiJun]

I guess it won't be a never ending story, but I have just built something new for my Tandy:

1.JPG

2.JPG

Have to flash the EEPROM now and test if everything is all right...

[rubber_jonnie]

I guess it won't be a never ending story, but I have just built something new for my Tandy:


1.JPG


2.JPG


Have to flash the EEPROM now and test if everything is all right...

Neat :)

Is it some sort of XT IDE type board?

I see it says 4 in 1 board, so what else does it add?

[HigashiJun]

@rubber_jonnie

It's a 4 in 1 board as you wrote, from Rob Krenicki:

https://github.com/rkrenicki/Tandy-EX-HX-4in1

It adds the following stuff:

- RTC (I have omitted the related parts, since I already have one fitted)
- XT-IDE
- 640 KB RAM
- RS232 serial port

But the most important is it has a passthrough connector, allowing me to fit a VGA card and a sound card.

[HigashiJun]

The smoke test was OK.

The 640 KB RAM is also recognised... So far so good.

Further tests tomorrow.

8-)

[rubber_jonnie]

@rubber_jonnie

It's a 4 in 1 board as you wrote, from Rob Krenicki:

https://github.com/rkrenicki/Tandy-EX-HX-4in1

It adds the following stuff:

- RTC (I have omitted the related parts, since I already have one fitted)
- XT-IDE
- 640 KB RAM
- RS232 serial port

But the most important is it has a passthrough connector, allowing me to fit a VGA card and a sound card.

Nice little upgrade that :)

[rubber_jonnie]

:(

The smoke test was OK.

The 640 KB RAM is also recognised... So far so good.

Further tests tomorrow.

8-)

A lack of smoke is always a good result :)