Getting WFI Working on TF3xx with ESP Module

[theq]

Careful! The TF3xx's do not have SPI ports. Those are only on the TF5xx series.

Thank you for correcting! Didn’t remember it was labeled ESPHEADER.

[kulamario]

If I do simple converter like this is should work ?

[terriblefire]

That circuit will kill the ESP module. It needs to convert down to 3.3V (Your circuit looks like its 5V).

[kulamario]

My module have voltage regulator

[terriblefire]

The TX and RX pins are not 5V tolerant!!!!!!

[kulamario]

Can u give some solutions?
How should be done please
Maybe is enough to use some like this?
https://www.ebay.co.uk/itm/173946979598

[theq]

The ESPHEADER on the TF330 is already 3.3V so you don’t need the MAX232. You only use those on the old school 9- or 25-pin serial ports.
You can use your ESP32-device, but it will not look so nice ;)

[kulamario]

I no have TF330
I want connect internet WiFi to my Amiga 500 via parallel port

[terriblefire]

Can u give some solutions?
How should be done please
Maybe is enough to use some like this?
https://www.ebay.co.uk/itm/173946979598

One of those which supports 3.3v will work.

[kulamario]

Thanks Terriblefire I order this module