330 disable function bug

[supaduper]

I just took the test. The tf330 remains activated.

So It now works with jumper in the Active position? and when you put the jumper on the DISABLE position it disables the TF330 from the CD32 ?

[Mister_Grave]

No. The problem is that I can no longer deactivate it.

[supaduper]

Clean the Jumper pins with alcohol and try it again

disabled jumper position below

TF330 Disable jumper pic.jpg

[Mister_Grave]

That's the first thing I did. I also recleaned all the contacts on the card as well as the riser.

[supaduper]

Then that is a puzzle, if it has the correct firmware posted in this thread it should work, can you reflash the board yourself ? or know someone who can do it for you

[Mister_Grave]

I theoretically have everything I need to do it: I have Jtag cables, I have a pi4 (which serves as a Home assistant). It's just a bit laborious...

If the firmware was bugged, the tf330 wouldn't work at all, right?

[supaduper]

Its the only thing I can suggest to see if it works with a reflash

[Mister_Grave]

Ok.... Is there a simple tutorial?

[supaduper]

32bits did a nice pi tutorial

[Mister_Grave]

Thank you !


And last question, does the Firmware you are offering here contain the latest performance boost improvements?