Excellent news. Many apologies for the screwup.alenppc wrote: Sun Feb 03, 2019 7:37 pm I confirm the fix is working. Cutting the trace is a bit tricky, you need a very sharp knife but it works.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF330 Soft Reboot Issue (SOLVED)
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 Soft Reboot Issue
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 Soft Reboot Issue
I have now done the fix on all my pre built boards, and I always use clear nail varnish to glue the patch wire and a pin head amount on the cut track, jobs a good un`
- Attachments
-
- TF330 rev2 bottom fix.jpg (194.34 KiB) Viewed 3836 times
Re: TF330 Soft Reboot Issue
Do you know how much you will be selling these for yet mate?supaduper wrote: Mon Feb 04, 2019 8:47 am I have now done the fix on all my pre built boards, and I always use clear nail varnish to glue the patch wire and a pin head amount on the cut track, jobs a good un`
Cheers
Paul